Buy Amsoil Synthetic Lubricants Factory Direct from Amsoil Dealer - Synthetic Oil AMSOIL Dealer Brian Dobben Presenting the Gold Standards in Lubrication and Filtration: Ultimate Fuel Economy, wear protection, environmental benefits and performance.

 Authorized Dealer of Premium Quality AMSOIL Synthetic Lubrication and Filtration Products

Phone: (419) 630-0874

To BUY AMSOIL BY PHONE FROM AMSOIL Headquarters
7AM-5PM Central
Toll-Free at:
1-800-777-7094

Give Operator

Sponsor # 1220579


 

Satisfied Customers


Expert Advice For YOUR Specific Application

 

We DARE you -
the Ultimate Synthetic Oil Challenge

 

Converting to AMSOIL & Breaking in a New Engine - Please Read This Critical Information

 


Amsoil Retail Product Catalog

Download Newest Amsoil Product Catalog
(~2.5 mb pdf)

 


 

Get Your FREE Special Reports on Superior Vehicle Maintenance for Less Money

- we include important insider vehicle engineering facts that OEM's don't even tell their dealership mechanics ! 

 


LATEST NEWS


Drive it for
a Million Miles like this 1999 Chevy Express 5.7L hits 1 Million miles on Amsoil


How does YOUR oil perform against Amsoil? See full 2009 Comparative Engine Oil Testing Report  


See How You Can Lower Your Vehicle Maintenance Costs to FREE

 

"Scamsoil Skeptics Corner

Revealing the boldest skeptic's questions... and our engineers' answers

 

Research Study Released -

September 2007! 

Since your whole tow load rests on TWO gear teeth, How can you save your "Diff" from failure? 

Hauling or towing?  How long do you want YOUR Differential to last?

Read the Free

Differential Gear Lubes Research White Paper (482 kb)  

Most of the 14 Name-Brand Gear Lubes Tested FAILED Specification Tests - is yours one of them? 

 

 

Free brochure on the Ultimate filters for engine oil and air (1.3 Mb pdf)

 

New CJ-4 Oil for the new 2007 Diesels

 

Fuel Economy:  Our exclusive Ultimate Guide to Improve Your Fuel Economy

(Updated again May 2009)

 

Boost your MPG -
See controlled test fleet average an 8.2% increase in fuel economy!

 

Breakthrough:  Nanofiber Air Filters use no oil, last over 100k miles, flow like oiled gauze, AND are 100% efficient
 at 3 microns!!!

 

NEW ! 

New AMSOIL EaAU Replacement Nanofiber Air Filters for Most Popular Air Induction Kits

 

What Product Do I Use?  When Do I Need to Change My Amsoil Oil or Filter? 

Oil & Filter Application Guide (PDF)

 

NEW ! 

New AMSOIL EaBP Nanofiber BYPASS Oil Filters are 98.7% efficient at 2 microns: take out more soot than any other filter!

 

Nanofiber Full-flow Oil Filters

Last 1-Year/25,000 Mile

 

AMSOIL AFL meets VW 505.01 and all Euro specs for gas/diesel/turbocharged>

 

26 Motorcycle Oils Tested: AMSOIL makes Motorcycle History with the most Comprehensive, Authoritative Research Study ever done (1 Mb PDF)

 


 

DIESEL ENGINES & FLEETS 
 

PICKUP TRUCKS:

 

Duramax Diesel Owners

 

Ford PowerStroke Diesel Owners
 


Dodge Cummins Turbo Diesel Owners
 

 


FILTERS


The Importance of Engine Filtration

 


Military / Aerospace NanoFiber filtration for YOUR VEHICLES:

Nanofiber AIR Filters:

100% at 3 microns, last 4-Years/100k Miles

 

Nanofiber OIL Filters

Last 1-Year/25k Miles

 

Cold Air Induction - Nanofiber Replacement Filters for Popular Cold Air Intake Systems

 

Bypass Oil Filters run 2-Yrs/60,000 Miles: 

98.7% at 2 microns is better than any competitor

 

 


HELPFUL LUBE & FILTER FACTS

 

 

Get Your Oil Analyzed by a Lab (pdf)

 

GM Reveals Oil Change Intervals Average 8,500 Miles with Oil Life Monitoring System (OLS) (pdf)

 

3,000 mile oil changes?!  What a rip-off!  GET REAL with modern technology.

 

Warranty Laws You Need to Know

 

Informative Articles Must Read!

 

The Auto Industry's Best Kept Secret REVEALED!


Technical Properties of Oils & Lubricants:
 About the ASTM and API Tests, and What the Test Results Mean

The Facts About
Aftermarket Oil Additives

 

API Comparative Motor Oil Testing

 

North American Engine Oils may be Harmful to European Engines


Which 30-weight Oil to Use:  0W-30, 5W-30 or 10W-30, with Discussion of Viscosity Basics


Ford & Honda's 5W20 Issue

Ten Myths About Synthetic Lubrication


Oil Color, Lubrication Ability and Contamination Level

 


AMSOIL
INFO

 

DOWNLOAD RETAIL CATALOG (2.6 Mb pdf)


AMSOIL vs. Mobil 1

 

  Compare AMSOIL to the "top" name-brand synthetic oils



Frequently Asked Questions

 

HELP US HELP THE ENVIRONMENT -
WE CAN REDUCE USED-OIL DUMPING BY OVER 87%

 

 

Converting to AMSOIL & Breaking in a New Engine - Please Read This Critical Information

 

 

Exxon-Mobil FINALLY follows AMSOIL's 33-year-old introduction of Extended Drain Intervals - kinda sorta

 


Wholesale Dealership and Preferred Customer Opportunities

 

Home Business and Financial facts
 

 

AMSOIL Introduces Four New Two Cycle Oils

 


Expert Advice For YOUR Specific Application

 

Satisfied Customers

 

 

 


 

MOTORCYCLES

 

 

12 Standardized Tests on 26 Motorcycle Oils: the most Comprehensive, Authoritative Research Study in Motorcycle History (1 Mb PDF)

 

 AMSOIL Quality Impresses Harley Riders

Harley-Davidson Oil & The Low Quality of OEM Oils
 

Why Harley Owners Choose AMSOIL!
HD Syn3 vs AMSOIL

 

Harley-Davidson AMSOIL Application Guide

Synthetics, Slipperiness and Wet Clutches  - Simply Not an Issue
 

 

 


 

Authorized AMSOIL Dealer Website

 

Links Index

 

Other Website Links

 


If you want to buy AMSOIL Products, visit the AMSOIL On-Line Store

 

AMSOIL European Car Formula 5W-40 Now Good for VW 505.01

AMSOIL European Car Formula 5W-40 100% Synthetic Motor Oil has been newly reformulated to meet VW 505.01, Mercedes-Benz 229.51 and BMW LL-04 specifications. AMSOIL European Car Formula 5W-40, engineered with advanced AMSOIL synthetic technology, is the only motor oil in North America to be recommended for the latest specifications of all three major European automakers Volkswagen (Audi), BMW and Mercedes-Benz, as well as the latest North American API specification.  AMSOIL European Car Formula 5W-40 is highly versatile for multiple applications and provides second-to-none protection and performance in the most demanding operating conditions.

Attention VW, BMW & Mercedes servicing companies:  In the available 30 or 55 gallon drums, this oil probably costs less than your current quart-bottle sources for the OLD spec oil This increases your oil-change profits on all vehicles, and once again lets you service ALL your customer vehicles with one engine oil, reducing risks of employee errors. 
Contact us immediately to set up your account to purchase this oil at commercial wholesale pricing.

The reformulated AMSOIL Synthetic European Car Formula 5W-40 Motor Oil provides the following features and benefits:

  • Offers advanced protection for major European gasoline and diesel passenger vehicles.
  • Engineered for turbo direct injection (TDI) vehicles, including the Volkswagen Jetta, Passat, Golf, Beetle and Audi A3, A4, A6 and A8 models
  • Provides maximum protection for todays smaller, high RPM engines.
  • Designed for maximum extended drain intervals established by European car manufacturers.
  • Formulated to exceed API SM/CF requirements for North American vehicles.
AMSOIL Synthetic 5W-40 European Car Formula Motor Oil surpasses the most demanding European oil specifications. It is recommended for European gasoline and diesel vehicles, including but not limited to, Saab, Audi, Volkswagen, Mercedes-Benz, MB, Volvo, Land Rover, Mini Cooper, BMW and Porsche.

DETAILED PRODUCT INFORMATION:

European Car Formula
Synthetic 5W-40 Motor Oil (AFL)

AMSOIL European Car Formula Synthetic 5W-40 Motor Oil is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred oil for virtually all European automobiles, especially turbo charged models. It is the only oil in North America to be recommended for the latest specifications of all three major European automakers - Volkswagen (Audi), BMW and Mercedes-Benz (MB) and the latest North American API specifications.

See Pricing Information or Place an Order

Package sizes include:

1-Quart Bottle
1-Quart Bottles (case of 12)
30-Gallon Drum
55-Gallon Drum

Product Description
AMSOIL European Car Formula Synthetic 5W-40 Motor Oil (AFL) is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred oil for virtually all European automobiles, especially turbo charged models. It is the only oil in North America to be recommended for the latest specifications of all three major European automakers - Volkswagen (Audi), BMW and Mercedes-Benz (MB) and the latest North American API specifications. AMSOIL AFL is highly versatile for multiple applications.

AMSOIL, the leader in automotive synthetic lubrication, produced the world's first API qualified synthetic motor oil in 1972. Trust the extensive experience of AMSOIL "The First in Synthetics®" to do the best job protecting your engine.

Maximum Engine Protection
AMSOIL Synthetic European Car Formula contains high quality anti-wear additives and surpasses the tough ACEA oil specifications for high temperature/high shear viscosity. It provides outstanding protection in high RPM, hot running engines and delivers dependable long-term performance for the extended drain intervals set by European automakers.

Superior Engine Cleanliness
The excellent oxidation stability, heat resistance and detergency properties of AMSOIL Synthetic European Car Formula keep engines clean. It is specially designed to prevent sludge and varnish deposits for reduced oil consumption, extended engine life and maximum overall performance.

Minimizes Exhaust Emissions
AMSOIL European Car Formula is designed for newer vehicle emission control systems. It meets current industry and vehicle manufacturer requirements for long life protection of gasoline vehicle catalytic converters and diesel particulate filters (DPF).

All Season Performance
The broad 5W-40 viscosity rating, low volatility (burn-off) and wax free nature of AMSOIL Synthetic European Car Formula make it excellent for hot and cold temperatures. Engine wear is reduced, oil thickening is controlled and vehicles start easier in cold temperatures.

APPLICATION
AMSOIL Synthetic European Car Formula is formulated to surpass the most demanding European specifications. It is recommended for European and North American gasoline or diesel vehicles requiring any of the following worldwide specifications:

  • API SM/CF
  • ACEA C3-04
  • ACEA A3/B3-04
  • ACEA A3/B4-04
  • BMW LL-04
  • Mercedes Benz 229.31, 229.51
  • Porsche
  • Saab
  • Volvo
  • VW 502.00, 505.00, 505.01
  • MS-10725

Service Life
Recommended for the extended drain intervals established by the vehicle manufacturer or extend based on oil analysis. Change oil filter at time of oil change.

Mixing AMSOIL
AMSOIL AFL is compatible with conventional and synthetic motor oils. Mixing AMSOIL motor oils with other oils, however, will shorten the life expectancy and reduce the performance benefits. AMSOIL does not support extended drain intervals where oils have been mixed. Aftermarket oil additives are not recommended for use with AMSOIL motor oils.

Health & Safety
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children. Don't pollute. Return used oil to collection centers.

TYPICAL TECHNICAL PROPERTIES
European Car Formula Synthetic 5W-40 Motor Oil (updated as of 12/05)

AFL

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

13.7

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

80.8

Viscosity Index (ASTM D-2270)

174

Viscosity CCS, cP @ °C (ASTM D-5293)

5204 (-30)

Flash Point °C (°F) (ASTM D-92)

230 (446)

Fire Point °C (°F) (ASTM D-92)

246 (474)
Pour Point °C (°F) (ASTM D-97)
-42 (-44)

Noack Volatility, % weight loss (g/100g) (ASTM D-5800)

8.9

Four Ball Wear Test (ASTM D-4172B @ 40 kg, 75°C, 1200 rpm, 1 hr), Scar, mm

0.44
Total Base Number
8.0
HTHS (cP) (ASTM D-4683)
3.7

 

 

Questions and Answers

about Amsoil AFL 5W-40 European Formula:

These e-mailed questions have been answered by our degreed automotive engineers.
(None of them are employed by AMSOIL, Inc.)

 

Q:  (September 2006)

I'm... a small shop owner and have a question for you. I use Amsoil in my personal cars and sell quite a bit to customers. There seems to be a lot of discussion on several boards about VW 505.01 Approval list and the fact that Amsoil is not listed. I can understand that there could be many reasons for this, but I'm about to do an oil change on a customer's 04 Touareg in a few days and I have 4 cases of Amsoil 5W40 Euro. I wouldn't know what to say if my customers asks if it is an approved oil. I can pick up Castrol TXT 505.01 oil at the dealer for about $5.95 a quart and end all worries, but I think the Amsoil is a superior product approved by VW or not. Worse case, if the engine blows up, totally unrelated to the oil because they would look for any excuse, could VW cause serious issues for my customer and my company? If there is even a hint of a chance, I may just purchase the Castrol and be done with it. I just wanted to get your position on this issue of meets specs, but not technically approved by the manufacturers.

Marc - from Long Island, NY

 

A: 

Marc   The law specifically prohibits a manufacturer from denying a claim based on unrelated aspects.  But further, the law puts the burden of proof on the manufacturer to demonstrate in independent engine teardown results and in oil sampling analysis that the oil was the actual cause of a problem.  Because it is very rare for any oil to be a problem, and because Amsoil has never in history been found to have caused any damage whatsoever, warranty concerns should be a non-issue.  See this information about warranty concerns with Amsoil products:  http://www.ultimatesyntheticoil.com/articles/warrantylaws.htm  If a rogue dealer employee causes a problem, the OEM will not back them when the customer asks, and Amsoil loves the rare opportunity to step into these situations.

The AMSOIL European Car Formula 5W-40 Motor Oil (AFL) IS approved because it DOES meet the 505.01 spec.  Some older lists do not have them, because for several months they (Volkswagon) would not release either the spec or testing requirements, or identify a testing lab that could perform the tests this is a common delay/ploy intended to benefit the original oil mfr (such as Castrol) who worked with them to formulate the spec and product.  The only questions are the product code and the age of the cases you have in stock.  If they have the AFL product code and have been purchased in the last six months (very rough approximation), they will have the new label as you see here, and it is certainly the new formulation. Heres the full scoop:

http://www.ultimatesyntheticoil.com/synthetic_engine_oil/AFL_meets_VW_505.01.htm  

However, keep in mind that what the manufacturer requires is meeting the specification - not being licensed by the OEM for a listing in the owner's manual, or Licensed by the API to display their trademark logo.  Meeting the specification, or in Amsoil's case typically exceeding most specification minimums by an embarrassingly wide margin, is a matter of repeated and longstanding record in the specified ASTM test results. In every case, whether Licensed or not, the full burden for spec compliance rests on the oil company and no-one else.  In this case, there is no other oil on the market that is claimed to meet all three latest specs for BMW, M-B and VW - another testament to Amsoil's performance supremacy. 

And while API Licensed oils are known to produce fatal sludging as early as 50,000 miles in a number of 1997-2004 engines from several OEM's, Saab service experts noted that Amsoil's AFL outperforms everything they've ever used in keeping engines clean and sludge-free.  This shows once again that the API's system of approving minimal performance is questionably risky for consumers, while Amsoil's reputation for extreme excellence is well founded.  We'd appreciate it if you posted a link to this information on some of the VW forums and member boards - it would help a lot of VW owners.


 


AMSOIL is the undisputed leader in synthetics.............

Since 1972, AMSOIL Synthetic drivetrain LUBRICANTS have proven to be the highest performance engine oils, greases, transmission fluids, and hydraulic and differential gear oils on the market. 
But the other key issue is
nanofiber filtration. 
We now cover oil filters, air filters and other fluid filters like NO-ONE else can.  AMSOIL offers the highest performance, most cost-effective, most comprehensive filter line on earth.  Consider air and oil...

OIL FILTERS:

Until now, Nanofiber filtration technology has been used exclusively in heavy duty applications, including the US ARMY Abrams M1 tank. AMSOIL Ea Filters are the first and only filter line to bring this technology to the auto/light truck market.

EaO nanofiber oil filters provide unmatched full-flow filtering efficiency to 98.7 percent at 15 microns, and 50 percent at 7 microns.  This translates to a 70% reduction in engine wear rates, tripling remaining engine life while giving longer filter life and lower pressure drop for better cold-start performance: the only filtration that gives you the best performance in every category!  Compare that to the filters lining the auto-parts shelves, which don't tell you their common 7,500 mile design life and either won't tell you what micron level their efficiency rating is for, or they claim a micron particle size without stating an efficiency: deceptive, meaningless numbers. 

Additionally, consider bypass filtration systems for commercial and fleet applications in cars and light, medium and heavy trucks which can filter particles down to less than one micron and are 89% efficient at 1 micron, making oil changes virtually unnecessary and virtually eliminating engine wear.  (A standard full-flow oil filter can only filter to 20 microns with any reasonable efficiency, but 5-25 microns is widely accepted as the wear-particle size range.)  Easy to install, these oil filter systems have been proven by millions of miles of over-the road trucks, construction equipment and fleet service. And we use these on our personal diesel pickup trucks: my Duramax 2500HD has over 70,000 miles since the last oil drain, the oil analysis looks perfect, and the appearance of this diesel oil looks like a gas engine with 3,000 miles on the oil.


AIR FILTERS:Abrams M1A1 Battle Tank bites the dust with Nanofiber Filtration Technology

The MOST IMPORTANT filter on the M1A1 Abrams battle tank is its' nanofiber air filter. 
The MOST Important filter on YOUR vehicle is also the air filter.

It's far better, and easier, to keep wear particles out of the engine than it is to attempt filtering them out of the engine oil.  Yet filter companies and vehicle manufacturer's are strangely silent about actual air filter performance and engine needs.  Now AMSOIL offers world-leading breakthrough Ea air filters with exclusive nanofiber technology.  Based on battlefield-proven air-induction systems used in military ground and air vehicles, this high-technology filtration is now available for consumer use!  Ea filters are guaranteed for 4 years, 100,000 miles.  The engineering rule of thumb for damaging wear particle size is 5 to 25 microns.  Incredibly, these filters are 100% efficient at removing particles of 3 microns, and are 80% effective at removing particles of a 1 micron size.  This means that NO WEAR PARTICLES CAN GET PAST OUR Ea AIR FILTERS!  AND, they're less expensive to use than ANY other air filter.

For Power Sports applications, AMSOIL offers a line of oiled-foam filters.  These filters provide better performance than oiled-gauze air filters, and are used almost exclusively in most off-road applications including baja, dirt-track racing, and motocross.

For light to heavy trucks, both gas and diesel engines, AMSOIL's partnership with Donaldson provides you with the best performance and most cost-effective air filtration systems in the world.  These include both Powercore and Nanofiber technology filters.  We have the full line of  Donaldson Filters Now Available , including air, fuel, water, oil and hydraulic filters, with exclusive performance warranties (no one else in the industry offers filtration performance warranties).  Contact us for specific recommendations, or see our Diesel Page.

Air Induction Systems:

Well-engineered aftermarket air induction systems can provide airflow improvements with gains in horsepower, fuel economy, and towing torque.  Unfortunately in many cases they may also let far more wear particles into your engine than the OEM filter.  And oiled media can contaminate mass flow air sensors, causing problems with emissions, fuel economy and performance that can even damage transmissions in some cases.  AMSOIL lets you leave those problems behind. Their full line of nanofiber universal air induction filters (EaAU) are designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and more. Whether your air induction system is in a gasoline street-rod, or a diesel truck, you have great airflow but you need better filtration and more capacity than oiled gauze or foam.  AMSOIL Ea Air Induction Filters are dry no-oil filters with nanofiber filtration media to bring your aftermarket far better efficiency, 50 times the capacity, and excellent airflow while being easily cleanable - every 25,000 miles.

WHY SWITCH TO AMSOIL LUBRICATION AND FILTRATION TECHNOLOGIES?

  • AMSOIL products saves you time and money.  With recommended extended drain intervals, AMSOIL performance typically costs LESS per year than conventional oil changes.

  • The only 25,000 mile/one-year and 35,000 mile/one-year motor oils in the world.

  • A vehicle lubrication solution with far less environmental impact, using an estimated 87% less oil and 5-10% less fuel !

  • The only oils and filters with a warranty for GUARANTEED performance!

  • Exceeds the most stringent performance specifications of all major U.S. and foreign automotive and truck manufacturers.

  • Provides up to four-times the wear protection of other motor oils.

  • Increases the mileage life of your vehicle.

  • Improves fuel economy.

  • Increases at-wheel horsepower.

  • Lowers transmission and differential operating temperatures and delivers better shifting, even in heavy towing.

  • Lowers fleet maintenance costs by lowering the costs of both scheduled maintenance, and mechanical repairs.

  • Lowers fleet capital costs by dramatically extending vehicle service-life.  (Vehicle mileage typically extended 20 to 100%.)

  • Diesel oil and filtration products designed to deliver more than 1,000,000 miles for over-the-road trucks before engine overhaul.

  • Used by many national racing teams, fleets, police departments, fire departments, ambulance fleets, construction firms and trucking companies.



WHY WORK WITH DMT TECHNICAL?

DMT Technical operates Ultimate-Synthetic-Oil.com as part of a group of highly skilled team of OEM Engineers and Lubrication and Filtration Specialists.  In fact, we are the ONLY such group on the internet, as well as the largest AND fastest-growing AMSOIL Dealer organization in the nation.  You too, can join our group when you become an AMSOIL Dealer and take advantage of all that we offer as you use products in your own vehicles or begin your own AMSOIL business. You cannot find a more knowledgeable and skilled group of Dealers anywhere. 

In addition, as a Dealer in our group you will receive exclusive unlimited product, technical and business support from the only group of Truck and Automotive Engineers and Lubrication Specialists on the net.  That's priceless - yet free - vital support that can make a huge difference to a growing business.

We do not run our business purely on the internet. We also have numerous commercial, industrial, trucking, excavating, construction, logging, police, racing and many more accounts that we support and service on a regular basis. We have several fully stocked warehouses and fully equipped shop facilities. This provides us with excellent knowledge of the products, equipment and the business and the ability to respond immediately to any of your needs. We will use this knowledge and experience to help you get started so you too can achieve your goals.

We possess the skills, desire and knowledge to answer questions, solve problems, improve efficiency, reduce downtime, maintenance costs and increase the durability and life of all of your vehicles.

Read what our satisfied customers have to say about us. Read through our website. Contact us with any questions. If you decide to become an AMSOIL Dealer you will be joining, in our opinion, the most skilled AMSOIL group there is. We will help you get started and provide you with the tools and information in order to be successful in this business or with technical and product assistance to use AMSOIL products in your own vehicles.

To get additional information:

We offer several options to receive information on AMSOIL. We welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Our AMSOIL Dealer Group is led by a Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. This exceptional benefit is unavailable elsewhere.

Please, email us at Brian@Ultimate-Synthetic-Oil.com and we will send you an exclusive comprehensive package of product, technical and business information. If you are serious about AMS OIL products and the business opportunity this is the best option. You will receive extensive technical and business support from both myself and my Direct Jobber, a Detroit, Michigan Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. We look forward to helping you learn about AMSOIL.

Or for a smaller, very general information package (which includes a catalog and Dealer application) you can request information via any of the links below.  Please note that your information is always held in confidence per our Privacy Policy, and will never be sold, loaned or otherwise distributed.

To request a FREE Factory Direct Catalog by MAIL

To Immediately Download a FREE Factory Direct Catalog

For Information on Becoming an AMSOIL Dealer

To Buy AMSOIL Products in the AMSOIL On-Line Store

To Sell AMSOIL in Your Store or Purchase For Use in Your Businesses Equipment

To visit the AMSOIL Corporate Website for Product and Business Opportunity Information

 

AMSOIL is Proudly Made in the U.S.A.

AMSOIL is owned by Americans.

AMSOIL is America's Oil.

Filtration and Lubrication Gold Standards - the Best

DMT Technical

Ultimate Synthetic Oil - AMSOIL Products

Garner, North Carolina  27529

Phone: (419) 630-0874

E-mail: Brian

Links