Dodge RAM Cummins Owners Page

If you want to buy AMSOIL Products, visit our vehicle maintenance page, or the AMSOIL On-Line Store or download a clickable pdf e-catalog

Dodge RAM Cummins Turbodiesel

Cummins and Dodge RAM Diesel Owners

AMSOIL offers superior lubrication AND filtration technology for your Cummins Diesel engine, as well as superior synthetic lubricant solutions for all your other drivetrain fluids.  This extensive webpage will help you learn how to best care for the Cummins and the rest of your power drivetrain, including the options for fluid and oil change service intervals, as well as learning what Chrysler/Dodge and most servicing dealerships don’t want you to know about AMSOIL synthetic motor oil and filtration technologies.

Look up your RAM Cummins maintenance details

LOOK UP YOUR

 

 

 

 RAM Cummins 

 

Rear Differential with upgraded aluminum cover

Free Special Bonus: your differential should last at least 500k miles.  Here’s how to prevent diff failure

Below, we cover:

  1. Cummins Engine oil options – both a Detailed Oil Review, and a summarized Engine Oil Selection Chart
  2. Cummins Recommendations and options for bypass oil filtration systems.
  3. Video showing how easy it is to take an oil sample from your truck for analysis testing.
  4. Special Cummins Owners Questions and Answers section – our engineers welcome your Cummins questions and give valuable answers.

This information comes straight from experienced Truck Engineers and Lubrication Specialists based out of the auto and truck engineering and manufacturing capital of the world – Detroit, Michigan.

We are diesel engine, powertrain, chassis and component experts, and are here to help you achieve optimum performance and longevity from your Cummins-powered truck.

(Please summarize – which oil should I use?)

You’ve spent your hard earned money on the Cummins Diesel option in one of the most popular and well engineered trucks there is, now don’t you think you owe it to yourself to use the very best oil in it? Your turbocharger needs a good synthetic oil for long life!  Petroleum oils CAN’T do that job as well.  In addition, you need high-performance synthetics throughout your engine and drivetrain to maximize your Cummins fuel economy and enable you to tow confidently, without transmission or differential failures.  What should your oil drain interval be?  That depends completely on the performance and condition of your oil and filtration, which is something you can control.

(For a deeper explanation of why we recommend AMSOIL-engineered diesel motor oils for the Cummins, review how to pick the best motor oil.)

Warranty?

Don’t let your local dealership service center tell you that you you have to use their brand of oil to “maintain your warranty”.  That is one of the biggest untruths we have heard, yet it goes on day in and day out.  We constantly receive calls from customers that were told this by their servicing dealership. Please be aware that this practice is not authorized or condoned by the auto manufacturers.

For a servicing dealership to essentially tell a customer that they have to use a lower quality oil to “maintain their warranty” is not only wrong but it is also illegal unless they provide it free of charge. There are Federal laws that protect you against this. Please read “Vehicle Warranties With AMSOIL” to learn more.

Here’s the bottom line: use of AMSOIL’s REAL SYNTHETIC lubricants throughout the drivetrains of commercial diesel fleets has been shown in field studies to net an average fuel economy improvement of 6.54 to 8.2%, while eliminating most drivetrain wear.  Reliability goes way up, along with fleet service life, and maintenance costs go down significantly.

Look up your RAM Cummins maintenance details

LOOK UP YOUR

 

 

 

 RAM Cummins 

This new Diesel Power pdf brochure covers important products and information on diesel-powered vehicles like the Dodge RAM with Cummins.


Engine Oils Specifically for the Cummins Diesel EnginesAMSOIL is devoted to protection

(This section has detailed explanations. For a simple summary, see section below: which oil should I use?)

^Up to Page Index
For the Cummins Diesel, AMSOIL engineered and manufactures three fuel-efficient turbodiesel engine oils.  The options split along the model years due to emissions equipment, with 2007 being the wavy dividing line:  early 2007 models follow previous model years because they fortunately lack the Diesel Particulate Filters (DPF’s), and so use “SAE CI-4+” Service Grade oils.

So for the 1984-1998 3.9L 4BT and 5.9L 6BT, the 1998-2002 5.9L ISB and QSB, and the 2003 to 2007 5.9L ISB CR Cummins engines, all three available oils can be used because CJ-4 oils are backwards compatible.  And all three oils will provide excellent cold-weather starting and Holset turbo protection, while dissolving any petroleum oil sludge and varnish deposits and slowly removing carbon buildup.  However, the ideal oil is the legendary AMSOIL 15W-40 Premium Heavy Duty Diesel & Marine oil (AME), which powers many of North America’s semi fleets and has been the go-to brute for Diesel Power Challenge contenders, and has the full advantages of high ZDDP and TBN: this oil is the best-performing choice for all non-DPF Cummins versions (1984-2007), and delivers the lowest wear-rates and 25,000 mile drain intervals.  This has been firmly established by extensive oil analysis testing and hundreds of millions of fleet miles.

In fact, if you use oil analysis you can usually go much longer than 25,000 miles on the oil in a year’s time.  (Dipstick checks should always consider any abnormal appearance to the oil, since it can reveal intrusion of coolant or fuel into the oil. Any unusual appearance should be immediately evaluated by a diesel mechanic and/or oil analysis, in order to avoid or minimize engine damage from conditions such as injector or head-gasket failures.)

The 2007 to current B6.7 (6.7L ISBe) Cummins in-line 6-cylinder are all equipped with DPF exhausts and use post-combustion cylinder over-fueling for the active regeneration cycle.  In order to extend the service intervals of cleaning the DPF filters, the SAE introduced the CJ-4 formulation requirements for engine oils which restricted the important Sulfated Ash and Phosphorus (SAPs) additives and created new formulation/performance challenges for engine oils.  The AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME)  and the AMSOIL Synthetic 15W40 OE Diesel Oil (OED) both deliver superior performance that far exceeds the CJ-4 specification for the new 2007+ Cummins engines with DPF’s. 

The first oil (DME) delivers maximum global performance and  protection achievable under SAE CJ-4, together with longer service life.  The second oil (OED) is intended for use at the Dodge/Cummins recommended drain interval, and is formulated with the lower API-marketed formulation restrictions (including lower ZDDP), to equal or outperform any competitive API-Licensed oil on the market at a low per-quart cost.  However, its’ drain interval cannot be extended beyond RAM/Cummins recommendations.  When used in conjunction with the AMSOIL Ea nanofiber engine oil filtersthe first oil (DME) will deliver lower wear rates and allow you to use oil analysis to extend the oil and filter change interval, and could deliver up to 1 year or 25,000 miles between oil and filter changes on DPF-equipped Cummins engines, depending on model year, fuel, and especially the loading/driving conditions (affecting the ratio between passive and active DPF regeneration). Otherwise without oil analysis, both of these CJ-4 oils are recommended for use at the longest Cummins oil-drain interval in the manual.  Due to the lower TBN of the low ash CJ-4 formulation, and the driving-habit variability of potential fuel contamination of the oil due to active DPF regeneration cycles, longer drain intervals DO require oil analysis sampling.Which Oil Should I Use?

For more information on this, look up your model and see what additional statements have been provided at the beginning of the information.  For example, when looking up the 2015 RAM 2500 with 6.7L Cummins TurboDiesel, you will notice this statement in red which also appears for all 2007 RAMs to current models:

AMSOIL has identified high fuel dilution in most 2007
and newer light-duty diesel pickup trucks, including this one.
When fuel infiltrates the oil sump, oil life is shortened.
Therefore, AMSOIL diesel oils used in this vehicle must be changed according to the manufacturer’s recommendation.
Oil drains can be extended further only when using oil analysis.

Other AMSOIL benefits include reduced sludge and deposit formation, extreme temperature protection, improved fuel efficiency and rust and corrosion prevention – and of course it does not void any new vehicle warranty. AMSOIL Synthetic Lubricants meet and exceed all API rated, Cummins and Chrysler/Dodge/RAM Specifications.  In fact, AMSOIL lubricants are so advanced that historically they’ve typically already met/exceeded nearly every OEM manufacturer’s NEW published diesel oil test standard, worldwide, without any reformulation.

Q:  Which Cummins engine model years allow the longest drain intervals with AMSOIL’s premium synthetic AME or DME 15W-40 diesel oils, and how is this affected by the Diesel Particulate Filters (DPF’s)?

This is an excellent question for owners considering the purchase of a vehicle with a Cummins diesel.  In essence, this question relates to two factors: the use of biodiesel, and the regeneration cycle approach of DPF-equipped Cummins vehicles.  These two issues combine in a cumulative way.  Any frequent use of fuel with a B5 (5%) or higher biodiesel component should be considered as mandating oil sampling analysis to extend oil drains out to 25,000 miles or beyond.  B2 is not typically a noteworthy factor in any except the DPF-equipped 2007+ Cummins engines, where it probably does play a small role in further reducing oil life beyond the glaring problem of fuel-contamination of the oil.

The old 3.9L 4BT and 5.9L 6BT, the 1998-2002 5.9L ISB and QSB, and the 2003 to 2007 5.9L ISB CR Cummins engines all have an advantage in this question, because none of these engines through early 2007 models have DPF’s.  These engines allow AMSOIL AME to deliver 25,000 mile / 1-year oil and nanofiber AMSOIL oil filter changes, as long as there is no head-gasket or injector leak present (mechanical problems which contaminate the oil). Likewise, installation of a bypass oil filtration system enables these engines to completely avoid oil changes by combining 25,000 and 50,000-mile filter changes with oil sampling analysis.AMSOIL provides 75% Better Protection 400x300_75ASL

However, the 2007 to present 6.7L ISBe Cummins is unfortunately the worst, most risky odds for being able to extend drain intervals beyond the Cummins recommendations. This is because the ACTIVE (not passive) regeneration cycle for the DPF burns out the filter’s accumulation by over-fueling the cylinders (after burn completion) to put diesel fuel into the exhaust, which has the piston rings unavoidably wipe unburned fuel down the cylinder walls into the oil.

“Passive” regeneration occurs during normal operation, due to high enough throttle & fuel-burn rates to take the internal DPF temperature above the ~1100°F threshold where the captured diesel fuel particles will be ignited and burned.  Active regeneration of the DPF occurs when the exhaust back-pressure builds (diesel particulate matter, DPM, has accumulated enough to obstruct exhaust flow). To force a DPF burnout,  the engine computer sprays fuel into the cylinders at the end of combustion so that the unburned fuel is exhausted into the high-temperature exhaust, raising the DPF temperature high enough to get burnout of the DPM buildup.

Because of the variable of Active Regeneration of the DPF, how the vehicle is used becomes a critical factor in oil contamination:

  1. Unfortunately, RAM “daily driver” B6.7 commuter pickups in city driving are almost certain to experience a high frequency of active regeneration.  [If a truck will be used in that way and you need to purchase a 2007+ model year, you should instead consider purchasing a 2011+ Duramax-powered vehicle, because the LML engine model changed the active regen approach by adding the Hydrocarbon Injector (HCI), which is simply a 9th fuel injector that sprays fuel directly into the turbo exhaust down-pipe, eliminating the need to over-fuel the cylinders post-combustion.  So the HCI now injects all the diesel fuel directly into the exhaust stream during active regeneration (cleaning of the diesel particulate filter).  This active regeneration strategy is unique to the LML, and will be used for the foreseeable future.]
  2. “Foreman” vehicles are quite likely to experience active regeneration cycles, which can vary from occasional to frequent. Idling and low speeds with light loads will ensure a-regen. In this application, approach extended drain intervals with caution.
  3. Some fleet and “working” vehicles will experience little or no problem with this fuel contamination of the oil, because they are rarely in active regeneration: these are vehicles which are always adequately loaded and frequently driven in highway traffic with medium to high throttle long enough for the passive regeneration to keep the fuel particulates burned out of the DPF canister.  Caution: OTR drivers must always rely on APU’s for stationary power, rather than idling the truck engine during lunch/dinner/sleeping.

But, how much the drain interval can be extended for passive-regeneration 2007+ Cummins engines may also be limited by the CJ-4 chemistry limitations of the DME – including the 10.4 TBN.  Although we are unable to recommend it, some fleets may be using AME (CI-4+) or a combination of DME and AME with oil sampling analysis to improve the TBN (12.2 for AME) and extend oil changes or eliminate oil changes when using an AMSOIL bypass filter system.   From a technical perspective, since the rates of AME and DME oil usage is roughly the lowest on the market, the use of AME seems unlikely to significantly shorten the cleaning interval of the DPF, and the cleaning interval is really the primary concern driving the tightened CJ-4 classification by OEM’s.  Additionally, AME will provide lower wear rates than DME: this is reflected by the difference in the 4-ball wear test scar sizes of 0.35 mm and 0.51 mm respectively. (Note that this difference is forced by the CJ-4 classification SAPs restrictions.)

More detailed DPF emissions system information for heavy-duty trucks can be found here.

Q:  What can you expect when changing your Cummins to
AMSOIL’s superior synthetic diesel oil?
 

Example: with commercial 15W-40 petroleum oil, my 2002 Duramax always idled at about 40 psi oil pressure when warm, and pegged somewhere over 80 psi when first started up.  After the engine flush procedure and change to AMSOIL’s 15W-40 AME synthetic diesel oil, dash oil-gage pressure immediately dropped to about 28 psi warm idle, and about 60-80 psi cold.  That is pretty typical with 15W-40 AMSOIL.  Some people might be alarmed by this lower oil pressure, but it’s actually a great sign: it means that more oil is flowing through a cleaner engine – for better lubrication, better wear protection, better engine cooling – and it’s taking less power (fuel) to pump that higher volume of oil.

The Secret Power of Nanofiber Bypass Filtration

^Up to Page Index

BMK27 AMSOIL Dual Remote Bypass Filter Mount for the Duramax
BK309 Dual Bypass Filter Mount in the BMK-27 holds two large filters

The ULTIMATE option for lowest maintenance costs and downtime is to install an AMSOIL Dual Remote By-Pass Filtration System.  This is the highest performance bypass oil filter in the world for light to heavy vehicle applications, and yet it’s also among the lowest cost.  This bypass filtration system extends the life of the oil in three ways: by adding 1-micron filtration, adding roughly two more quarts of oil capacity, and adding additional passive cooling for the oil.  With this nanofiber technology system you eliminate 90-98% of engine wear, and only change your oil when oil analysis indicates a need.  The full flow EaO filter is changed at 15,000 mile (severe service) or 25,000 mile (normal service) intervals and the EaBP Bypass filter is changed at a minimum of 60,000 miles/2 yrs (or longer with oil analysis).  (For questions on Cummins 6.7L and 5.9L oil pressure when using Dual Remote Bypass Filtration, see our Q&A Section at the bottom of this owners page.)

In addition to pickup-truck sized systems, we have a large-capacity Dual-Gard bypass filtration system for sumps over 20 quarts, and a special bypass filter solution for nearly any heavy-duty OTR or off-road applications.

I have over 70,000 miles on the oil change in my diesel Duramax truck [using the AMSOIL Dual Remote Bypass system, which I installed in a few hours with a GM headquarters engineer when we also installed a system on his 2005 Silverado Duramax toy & RV-hauler], and I do oil sampling analysis.  Look here at one of my 6.6L Duramax oil sample reports and you’ll see that I have no TBN or viscosity problem, and wear rates are very low.  And fact is, I probably will never have a problem, even though I’m changing only my oil filters – not my oil. 

In this video I used my own Duramax truck to show you how easy it is to pull an engine oil sample for analysis (for best sampling results when using this method, drive the vehicle to warm and agitate the oil, immediately prior to pulling an oil sample):

See this video on YouTube

Oil analysis can also be valuable without bypass filtration.  When using AMSOIL nanofiber Ea Air and Oil filters, analysis will usually allow extending AMSOIL drain intervals far beyond the guaranteed 15,000 (Severe) or 25,000 mile (Normal Service) drain intervals on gasoline engines and on non-DPF diesel engines.  Achievable drain intervals on 2007+ DPF-equipped engines will vary depending on loads, temperatures and driving conditions.

Safely Extend Oil Drain Intervals With Zero Warranty Issues:  Download our Free Guide to Oil Analysis Sampling

Need an Oil Analysis Kit or sampling pump?   Visit our Oil Analysis Store

For most gas-engine or pre-2007 diesel vehicle applications using AMSOIL synthetics and nanofiber bypass filtration, oil analysis will show that you NEVER need to change your oil again – even after 500,000 miles!  

How is this possible???  By using highly engineered synthetic oil that is designed to retain its properties and not break down, and using nanofiber filtration that removes all wear particles, (and not over-fueling cylinders so the oil gets contaminated) there is no longer a need to change oil.  The oil is so tough and the additive package is so high-tech that just topping off the oil level when changing filters is enough to renew the oil and additive package properties.  This saves a lot of downtime, as well as money, and uses about 80% less motor oil – which benefits both your wallet and the environment.

The AMSOIL 15W-40 Premium Heavy Duty Diesel & Marine oil and AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME) do not break down like conventional petroleum based motor oils, are much more shear-stable and do not have the waxes, paraffins and by-products that come out of crude oil that is pumped from the earth.  Which oil should I use?

The by-pass filter removes the particles that cause wear in your engine down to less than one micron (a micron equals 0.001 mm) and keeps the engine oil analytically clean so you do not need to change your oil for a long time, while still getting far better protection than someone that changes their oil every 3000 miles.  We are experienced at installing these units on Cummins diesel engines and can provide you with installation instructions, tips, and photographs of previous installations.

BMK-27 Installation on 2002 GMC 2500HD Duramax
AMSOIL Dual-Remote Bypass Filter

One of the Power Stroke Diesels in our dealer group had over 84,000 miles on the same oil as of November 2003. Laboratory oil chemical analysis every 15-20,000 miles indicates the oil is perfectly suitable for continued service. Other customers have traveled well over 100,000 miles with pre-2007 Cummins engines, and oil analysis still indicates no oil change necessary.   My personal Duramax 2500HD CC/SB/4×4 has the bypass system and has traveled 77,000 miles with only filter changes, as of April 2008. Here’s one of my 6.6L Duramax oil sample analysis reports, so you can see the data for yourself.

In addition, the AMSOIL By-Pass filter will also remove up to a pint of water from your vehicle’s lubrication system, which is especially important in a diesel engine. Without this the water promotes rust, corrosion and rapid wear. Internal engine heat also creates acids which also wear the engine components. The water and acids build and continue to work destroying your engine even after engine shutdown.

Oil analysis provides a big return for a small investment by: extending equipment life by preventing premature component failure; reducing maintenance costs by eliminating unnecessary component changes and decreasing downtime due to premature scheduled maintenance; enabling calculation of optimum drain intervals that reduce lubricant costs and assure maximum equipment protection.

Oil Filtration:  a full-flow oil filter simply cannot remove all the finer particles down to 5 microns because the oil must be filtered quickly, so it can only remove most of the larger particles present in the oil.  A regular full flow engine oil filter will only remove wear particles down to the 20-25 micron range, while an AMSOIL full-flow Ea oil filter removes the majority of particles in the 7-20 micron range with 98.7% first-pass efficiency at 15 microns. A study completed by Federal Mogul Corp. analyzing over 7000 main and connecting rod bearings concluded that 60% of all engine wear occurs in the 5-20 micron range. This is why no matter how much you change your current full flow oil and filter, regardless of brand, that you still are not removing many of the particles that cause the greatest wear in your engine.

Extensive testing shows that AMSOIL Ea Oil Filters achieve a near-perfect absolute efficiency rating. The exclusive new technology used in AMSOIL EaO Filters provides filtering efficiency to 98.7 percent at 15 microns, and 50 percent at 7 microns. EaO Filters are the most efficient full-flow filters that are available for auto/light trucks, period.

Q: How do EaO filters compare to the full-flow SDF filters that AMSOIL offered for many years?

A: AMSOIL SDF Filters were not as efficient as the modern nanofiber EaO: filtering efficiency was 94.3 percent at 15 microns and 51.2 percent at 7 microns. The AMSOIL SDF full flow filters had a finer synthetic cellulose filtration media, 75% greater efficiency and up to 300% greater capacity than other popular oil filters, as tested according to the Society of Automotive Engineers (SAE) HS806 test method.  They were quite good, but the new Ea filters, with nanofiber technology, are even better.

Now, back to considering the new nanofiber bypass filters, which are used in addition to a full-flow nanofiber filter.  AMSOIL EaBP Filters are high efficiency bypass filters with 98.7% efficiency at two microns. They also remove soot, providing the ultimate in protection against wear, oil degradation and corrosion: your diesel’s dipstick will show remarkably clean oil, darker than from a gasoline engine but not at all jet-black from soot like typical diesel oil.  Most importantly, you virtually eliminate engine wear, because all the wear particles are filtered out of the oil.

 

Nanofiber AMSOIL Bypass Filter Options
In Center above, the BMK-27 Dual Remote Bypass Filter setup for the Duramax

A complete BMK-23 AMSOIL Universal Dual Remote By-Pass Filtration System kit plus added filters costs under $500, so it is a very cost-effective improvement to your Cummins that will pay for itself quickly. (Note that there is great flexibility in mounting location and position – see our bypass filtration page for details.)

Until you choose to install the Dual Remote by-pass filtration system, the AMSOIL EaO52 full-flow nanofiber engine filter is a significant benefit to the long term durability of your Cummins, as well as allowing for 25,000 miles of service on the filter.  When you check your oil level every 5,000 miles or 3 months, all you have to do is check the oil level and top it off – don’t drain it or change the filter. (Ignore the OEM oil life indicator system – don’t use it, except to remind you to check your oil level.) When you reach 25,000 miles/1-year you can either change the oil and filter or take an oil sample from the dipstick tube using an AMSOIL sampling pump and send it into Oil Analyzer’s Inc using a pre-paid kit. Oil analysis will indicate the exact condition of the oil and whether it is suitable for continued service as well as determining if there are any other engine components or wear items that you need to be concerned with.

For top-quality oil analysis sample kits, tools, and vehicle data trending, Visit our Oil Analysis Store

AMSOIL has a complete line of synthetic oils, greases, transmission fluids, gear lubes, Ea nanofiber air filters, by-pass and full flow filters and bypass filtration systems designed to extend the life of your vehicles and equipment and save you time and money. In addition, for purchasing products at wholesale cost, we also offer a Preferred Customer purchase option, and for businesses a retail sales purchase option or commercial account purchase option. Finally, we also offer a Dealership Option for anyone interested in becoming an AMSOIL Dealer.
^Up to Page Index

How to Reduce or Prevent Holset Turbocharger Bearing Seizures on Cummins Diesels

One of the many specific areas on turbocharged Cummins Diesel engines that can clearly benefit from the use of synthetic oil is the turbocharger. There are primarily two factors which are oil-dependent: heat-soak, and dry-starts.

When a turbocharged engine is shut off immediately after use, bearing “heat soak” occurs due to the heat that naturally flows up out of the engine and the hot exhaust manifold into the turbo, adding to the high temperatures still present in the turbocharger: all this heat “soaks” into the bearings which are no longer being cooled by a flow of engine oil.  Over a period of time this “cooking” of the residual bearing oil can lead to deposits that can reduce or block the oil flow to the turbocharger bearings, which can lead to turbocharger bearing seizure.

The hotter the outside temperature, the heavier your load, and the less time you allow the truck to idle before shutting off the engine, the greater the risk to your turbocharger’s life from “cooked oil”.

“Dry-starts” have long been estimated to produce 60% of overall engine wear, when using petroleum engine oils.  The term “dry-start” refers to the fact that when an engine first starts, there is no oil pressure yet.  And starting the engine 45 minutes after you shut it off is very different than starting it 45 hours or 45 days later, when it’s REALLY a “dry-start”.  Most modern OEM turbo engines are designed to “quickly” get oil to the turbocharger, but this will still take between 2 and 12 seconds in mild to hot temperatures, depending on the exact position of the crankshaft and cam shafts which allowed little or most of the oil to drain back out of the oil passages.  In cold temperatures, building full oil pressure can normally take between 8 and 60 seconds, depending on the engine, the oil, and the temperature!

Fully synthetic oils have a film strength of 7 to 10 times that of a petroleum oil, so that they cling and protect metal surfaces that don’t yet have oil flow, even when the engine hasn’t run for days or weeks.  AND, they also flow with thinner viscosity in sub-zero temperatures than a petroleum oil of “equal” weight, so that they get to the turbo bearings much faster.  For these reasons, fully synthetic Group IV / V oils have an ability to reduce dry-start engine wear by 90% or more.

Tip: NEVER increase from idle rpm or put a diesel in gear before you see full oil-pressure on the gauge!

To combat these problems and give your turbo maximum life, our engineering staff recommend two things: 1) one of AMSOIL’s Synthetic Diesel Oils, and 2) use of a turbo cool-down timer.  A true synthetic oil does not break down and form deposits in the same temperature range as petroleum (“mineral”) oils: it is more durable at much higher temperatures.  A cool-down timer gives your engine a chance to lower the engine-block temperature and EGT (Exhaust Gas Temperature) to a turbo-safe level before the engine shuts off.  Of these two, the most important is to make sure your Duramax engine oil is a high-quality true synthetic (Group IV / V).

AMSOIL’s Synthetic Diesel Oils are inherently far more thermally stable than most diesel oils on the market, and have been shown to keep turbochargers considerably cleaner than other brands of oil. In fact, AMSOIL synthetics have a noted historical reputation for maintaining turbochargers in a clean like-new condition.  Meanwhile, poor quality engine oils have been shown to cause turbocharger bearing seizure in under 100 hours during a “heat soak” test.

Many other engine oils will survive the 100 hour “heat soak” test, but… with considerable deposits and incipient oil passage blocking.  So what engine oil you select for your Cummins diesel is vital for long Holset turbo life.  If you use typical petroleum name-brand diesel oils, it is critical that you let the engine idle for 3 to 30 minutes after stopping (depending on load, air temperature and driving conditions), to allow the engine, exhaust and turbocharger to cool while oil is flowing through the turbo. This “cool-down” period does not eliminate deposit formation when using petroleum diesel oils, but it will dramatically reduce the formation of deposits.

The bottom line: To prevent or eliminate turbocharger bearing seizure, there is no substitute for a high quality synthetic diesel oil (like AMSOIL’s) as they have been proven to maintain turbochargers in an almost “as fitted” condition, and significantly reduce deposit formation.  Take a look at the varnish deposits in this picture below, which are the results of a severe high temperature deposit test with some of the most trusted commercial brands. This test clearly shows that AMSOIL keeps engines cleaner longer than other major brands of diesel oils. Which oil would you rather have protecting your Cummins turbo-diesel engine?

Comparative High Temperature Oil Test

 

We are here to help you learn the facts and to show you how using superior AMSOIL products will increase the performance and add to the longevity of your Cummins Diesel, while saving you time and money. RAM Cummins Diesel trucks are excellent vehicles and exceptionally well engineered by Chrysler/RAM and Cummins.  In our opinion, they are one of the most advanced diesel vehicles ever produced.  However there are ways to make the performance and longevity even better with AMSOIL Synthetic Lubricants.Rear Differential with upgraded aluminum cover - click here for how to prevent diff failure

(For a deeper explanation of why we recommend AMSOIL-engineered oils for the Cummins, review how to pick the best motor oil.)

Your differential should last 500k miles or more.  Here’s how to prevent diff failure.

Skeptical? No problem:

Read our Q&A with hardcore “scamsoil skeptics”

Long engine life:  Many people believe that getting 200-300,000 miles on a gas engine is proof of a “good oil”, but that’s nothing. In reality nearly any oil can do that, due to modern engine designs.  In contrast, we have an article describing an AMSOIL user with 731,000 miles on his 1993 Ford Aerostar, on the original engine and transmission. He was using AMSOIL from the beginning.  This type of mileage performance is unheard of in basic passenger vehicles with conventional petroleum oils, but is not uncommon when using AMSOIL synthetic lubricants.  Newer AMSOIL synthetic oil and filter technology have recently enabled the “million mile van which was still running strong after 1.2M miles.   How much money was saved by not replacing those vans every 200,000 to 500,000 miles?

Lessons from the Million Mile Van

Improved Cummins fuel economy savings:

My own diesel truck gained 8% in fuel economy, and my car mpg improved 10%.  While most customers will only get a 3 to 10% fuel economy improvement, gains of 20% are not unheard of in some vehicles.  Phillip is a customer with a 1999 Oldsmobile Silhouette van who had changed his motor oil at 3,000 mile intervals.  In the spring of 2005 when he used Engine Flush and changed to AMSOIL engine oil with about 85,000 miles on the odometer, he got an instant 20% fuel economy increase which was saving him about $12 per week.  That annual fuel savings of more than $600 is six times more than the $100 annual cost of the AMSOIL products.

In a commercial fleet, changing all drivetrain fluids to AMSOIL usually averages a 5-10% fuel economy improvement.  In rigorously controlled conditions, a small test of commercial Class-8 vehicles got an 8.2% fuel economy improvement by changing all drivetrain fluids to older AMSOIL fluid technologies: now available in historic archives, that test was followed up more recently with current products in a new test averaging 6.54% improvement.

Improve Your Fuel Economy: the Ultimate Guide

 

CAUTION !         BIO-DIESEL FUEL ?         CAUTION !

BIO-DIESEL FUEL CAUTION

Biodiesel fuels produce more rapid breakdown of ANY engine oil, including synthetics.
No matter what brand or type of engine oil you use, you will need to closely monitor your oil performance with oil analysis and shorten drain intervals as your use of biodiesel blends increases.  B2 fuels are not typically a problem for pre-PDF engines, or for 2011+ HCI-equipped engines, though B5 fuel use needs sampling analysis.  But for 2007-2010 Duramax engine models which over-fuel the cylinders post-combustion to regenerate the DPF, use of bio-diesel will mean cutting your previous oil drain intervals in half (assuming use of the same engine oil).  If extended oil drain intervals are not shortened to near OEM recommendations or at least monitored with oil sampling, biodiesel contamination is likely to produce engine damage due to oil failure.

CAUTION WITH BIO-DIESEL FUEL !

^Up to Page Index

Which engine oil should you use in your Cummins Diesel?

To summarize quickly (see Detailed Oil Discussion above), your three choices for pre-2007 (non-DPF) Cummins diesels are the 15W-40 Premium Heavy Duty Diesel & Marine oil (product AME, the best option), or the AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME), or the AMSOIL Synthetic 15W40 OE Diesel Oil (OED).  For 2007 and later 6.7L diesels, those models are equipped with the Diesel Particulate Filters (DPF’s), and your truck requires either the recommended AMSOIL Premium 15W-40 Synthetic Diesel Oil (DME), or the AMSOIL Synthetic 15W40 OE Diesel Oil (OED), which exceed the new CJ-4 specification.

For optimal vehicle maintenance and cost, UltimateSyntheticOil and DMT Technical caution the use of OED unless the only objectives are to gain AMSOIL technology with the lowest per-oil-change cost while using OEM drain intervals, and when oil sampling will not be a Predictive Maintenance (PM) tool.
Any of the three oils will work well for you, and they will all increase your Cummins fuel economy over your current/past oils, but our best engineering recommendation is for you to make an informed choice based on your specific needs and operational priorities.  So…

Here are our suggestions for choosing the best AMSOIL engine oil for your Cummins fleet:

For this Application…                               Pick this oil:                

2001 – early 2007 (no DPF, CI-4+)                              15W-40 (AME)

2007 & later models (CJ-4 spec is req’d)*                  15W-40 (DME)

Maximum Cummins Fuel Economy          15W-40 (AME) or 15W-40 (DME)

Cold Temperature Performance                           Any of the three (-39 to -40oF)

All-fleet oil for home/farm/garden                 15W-40 (AME) or 15W-40 (DME)

Lowest oil usage                                                  15W-40 (AME) or 15W-40 (DME)

OTR Freight Hauling                                         15W-40 (DME), 15W-40 (AME)*

All-fleet oil for class 3-8                                    15W-40 (AME) or 15W-40 (DME)*

All-purpose logging/heavy-construction      15W-40 (AME), or 15W-40 (DME)*

OEM drain intervals, no sampling, with short-medium equipment service life:

                                                                         15W-40 (OED)

 

 

* The low SAPs of CJ-4 spec oils do extend DPF service cleaning intervals. However, for some fleets the extension may be a minor benefit which may not be as attractive as the CI-4+ benefits of higher TBN and lower wear rates.  Fleet PM engineers should evaluate.

Ultimate Synthetic Oil Diesel Recommendations

 

NOTE:  15W-40 (DEO) oil is also a fully backwards compatible, all-fleet oil.  So if using one oil for your entire fleet is one of your most important considerations, and your fleet includes 2007+ diesels and earlier models without DPF’s, this is the oil to use.  However, be aware that the TBN constraint imposed by the CJ-4 spec means that extended drain intervals should be validated in your vehicles with oil sampling analysis.  (DME has a TBN of 10.4, vs 12.1 for AME & 9.0 for OED.)  For this reason, our best recommendation is to use two fleet oils: one for gas and 2006 or older diesels, and the other for 2007+ DPF-equipped diesels.

Simply changing your oil more often with “reputable” oil will not give your Cummins engine all the benefits that AMSOIL offers:

You will not get improved fuel economy, you will not get reduced engine wear, you will not get reduced operating temperatures, you will not get extended drain intervals and you will not save money in the long run.  Please, allow us to show you a better way.  We are here to help you.  You have everything to gain and absolutely nothing to lose!

Recommendations and Related Articles:

^Up to Page Index

Look up your RAM Cummins maintenance details

LOOK UP YOUR

 

 

 

 RAM Cummins 


Cummins Owners Questions and Answers
about lubrication, filtration and other truck maintenance issues:

These e-mailed/posted questions were answered by our degreed automotive engineers.
(None of them are employed by AMSOIL, Inc.)

^Up to Page Index

Q:  AMSOIL Dual Remote Bypass Kit for 2005 Dodge RAM Cummins 5.9L Turbo-Diesel [Adapted from May 2016 e-mail inquiry. Also Become an AMSOIL Preferred Customer to save up to 25 percent, earn points, get exclusive promotions, and win free gearapplies to 6.7L Cummins engines.]

I am wanting to install the  amsoil universal duel remote bypass system on my 2005 dodge 3500, some online forums say not to use this setup because of low oil pressure at startup. Is it safe?

Thanks,

Merv J.

A:  Merv, I’ll answer your question and also include some background so you can understand the interaction of the variables behind-the-scenes in the engine application.

First, here was AMSOIL’s response when I inquired with their technical department (May 2016):

“In the end you can install whatever you want, however in previous experience with some 5.9L and 6.7L Cummins engines we have run into picky oil-sending-unit errors indicating low oil pressure and kicking off lights on the dash.  Now this wasn’t on all trucks, but some, indicating variation in the sending unit.  I do not believe there is an oil pressure issue, but we cannot market a system in which any issue could result.  That said, we are focusing on single remote filtration systems for Cummins engines.  We have a method right now and are working on a packaged system with all components required to make it the most cost effective solution and easiest to install.  That single remove system should be out in coming months.”

One of two things is likely happening, or a combination of both.  First, either the acceptable variation from the targeted low-oil-pressure setpoint allows the warning light to come on at a higher oil pressure than what Cummins is actually targeting for the “low oil pressure” threshold.  This seems most likely to be the primary problem, based on the limited information I have at the moment.  Second, it could be the chosen design location of the oil pressure sensor: I’m uncertain what this is, but if it is located between the oil pump and the oil filter (for example), then it will be expecting to see pressure several PSI higher with the standard oil filter than with the Dual Remote Bypass filter kit. This is because the oil pressure drop across the AMSOIL filter kit is quite a bit lower than the stock oil filter, which of course is good thing.
I don’t know which one is the case, but it sounds like AMSOIL has studied it and has a good handle on the issue. So I’m not inclined to investigate it further.  However, if the only indication is “low oil pressure at startup”, where the light goes off after a few moments, then it is no concern. However, it could be very helpful if I fill in some technical details for you:
From the standpoint of oil flow hydraulics, there is really no significant difference from the oiling system with the stock truck, vs the oiling system with the Dual Remote Bypass system installed. The two filters in the Dual Remote are in parallel, and the large full-flow filter is much less restrictive than the stock oil filter. This is one factor behind various engines showing lower oil pressure after installation, while the other factor is the oil passages being cleaned out: the oil is flowing more easily through the engine since there is less filter restriction, meaning that there is higher oil flow volume with a lower fuel cost to pump the oil, and these improvements show up as a reduction in oil pressure.  Another way to say this is that sometimes lower oil pressure is good, and this is definitely an example.
Additionally, AMSOIL synthetic engine oils provide superior protection against “dry start” conditions when a vehicle has been sitting for days or weeks, when oil can drain out of the engine passages back into the pan so that there is a longer delay to build pressure while the engine passages are filled back up with oil.  This case also occur overnight if the oil passage holes happen to align just right when the crankshaft stops.  That’s why it’s a variable 1 to 10 seconds to build diesel oil pressure in the morning’s first start-up. This dry-start condition has been reported to cause up to 60% of engine wear.  Fortunately, AMSOIL oil provides superior engine protection until the oil pressure builds. However, you should always wait until oil pressure builds before you put the truck in gear.
For more information, please reference our extensive Dodge RAM Cummins Owners Page.
For detailed information and to view the new Cummins-specific kit when it becomes available Late 2016, see all the available Nanofiber Bypass Oil Filtration options from AMSOIL.

Q:  Changing Fluids in my Diesel truck (Adapted from the January 2009 Posting on the TruckTrends forum because it also applies to the RAM/Cummins platforms.)

I have a GMC Sierra 2500 HD Duramax 4×4 with a 6-speed standard gearbox.  I bought it new in 2001 and now have 98 000 miles on it.  Over the years I always made sure that the maintenance was done as per the owner manual but something bugs me.  Nowhere in the schedule maintenance does it talk about gearbox oil change.  They cover the engine oil, the engine coolant system and all kinds of minor items but they never talk about the standard transmission, the transfer case, the rear and front differentials, and what about the power steering and the hydraulic clutch?  How many years can we go without replacing the oil in all these components?  I understand that they use synthetic oil these days but are these synthetic oils good for the life of the truck?

A:  Recommendations for Changing Transmission Fluid, Transfer Case Lube, and Differential Gear Oil Fluid (Response posted by us, 1/12/2009, but we have made a few slight improvements below.)

There’s much more to this subject than meets the eye.  I stumbled across this question today while doing a search, and thought I could help clarify.  I’m a Mechanical Engineer with an ’02 2500HD Duramax, and have spent the last decade in the automotive industry supplying to most of the OEM assembly plants.  I speak fairly regularly with an OEM GM engineer, who also has a Duramax, and we worked together in his shop installing remote bypass filter kits on our Duramax 6.6 engines.  [I later became a Senior Engineer at Chrysler/Dodge/RAM headquarters, which sadly prompted me to sell my Duramax for the benefit of superior parking, where I sat next to the engineers who were responsible for all the vehicle fluids and lubricants.]

For maximum vehicle life, OEM powertrain engineers (in general vehicle terms, rather than in Owner’s Manuals or Service Manuals) recommend changing ALL truck lubrication fluids in the first 2,000 to 5,000 miles of service.  This is generally because of the high operating temperatures and high wear-particle content generated during the break-in period, which break down and contaminate the lubricants.  Changing the fluid during this time, instead of at the factory-recommended intervals, can double to quadruple system life. Going to a high quality synthetic will at least double it again (NOT all of them are “factory fill” synthetics, as is often rumored).  For example, the front diff fill cap on 2500HD 4×4’s through some 2004 models are not designed to have long-term compatibility with all synthetics, which should tell you something about the factory fluid.  I forget which is which, but one is white, the other black.  You’ll need to order the correct one to go synthetic up front.

It goes back to “planned obsolescence”, which in OEM terms is really just the engineering decisions to hit target goals [and not spend extra money to exceed them]. Currently, metal finish and surfacing technologies allow slower wear, so that non-commercial users will make it past warranty with the factory drivetrain fluids, and commercial users will pay for diff and tranny failures that aren’t covered under warranty for commercial use.
You can download a powerfully educational Research White Paper here on Gear Lubes – as far as I’m aware, the most authoritative testing ever published to date (2015), comparing 14 gear oils in 9 important tests:  Gear Lube White Paper

If you note the background info in the first section you’ll start to get a good idea of reality on differential failures, which also translates to tranny and transfer case failures.  Secret: nearly all of them fail, in truth, because their lubricants failed long ago. As as you’ll see in the test data comparing those 14 gear lubes, just because it’s “synthetic” does NOT mean it’s high performance in every important function.

My Duramax purchase was a personally pivotal event because it sparked my shocked research to discover how easy it is to run 500k-1M miles as a 5th wheel tow vehicle… without drivetrain failures (I’m not going to vouch for injectors and fuel pumps, nor for offroading, etc.)  Many truck owners, like myself, plan to keep their trucks for a very long time. If you’re in that group, I recommend that you change everything to true synthetics, and don’t use dealer fluids. Contrary to so many online forum postings around the web, the use of a dramatically superior synthetic lubricant is a dramatically superior choice that does NOT cause failures nor cause the OEM to deny warranty coverage, and the few Dealer service managers who claim otherwise are simply wrong – and wouldn’t dare put their statements in writing.

And beware having a GM dealer change your transmission fluid: I discovered that very few even carry a fluid that meets the Allison TES-295 spec.  Less than a mile from each other, my GM dealer didn’t recommend using a synthetic in the Allison, while the commercial fleet center knew that Allison’s extended commercial warranty required a high-performance synthetic – but still didn’t carry it or use it.  So I negotiated the fluid-exchange fee for bringing my own fluid to the Dealer.  It’s eye-opening for a fleet to learn that Allison’s expensive extended warranty requires the expensive synthetic fluid, but that the fluid itself reduces tranny failures by way over 90%.  Hint – there are only two fluids that meet TES-295, and Allison lists only the non-AMSOIL one that they’re partners with.

(Yeh, unfortunately very few people know this stuff… outside of lubrication, drivetrain, or reliability/maintenance engineers. Any vehicle can be a 500k+ mile vehicle, but it’s just not in the OEM’s or oil-drilling companies’ best financial interests to explain how.  So I expect that this info is very helpful.)

[After the change to AMSOIL’s full synthetic fluids, the transmission, differential, transfer case and power steering synthetic fluids can be changed per AMSOIL’s recommendation based on Normal or Severe use intervals, typically 50k miles severe or 100k miles normal. See more detail here on recommended intervals.  Fluid analysis may show that 150k mile intervals are acceptable for OTR highway miles. NOTE: The RAMForum has many excellent resources for Dodge RAM trucks, such as this official 2010-2012 6.7L Turbo Diesel Engine Service Info.]


Brian – BSMET
Sierra 2500HD D/A
Diesel Turbo Life Saver
AMSOIL Nanofiber Remote Bypass Filtration and over [120k] miles since last oil changeAMSOIL Preferred Customers save up to 25 percent, earn points, get exclusive promotions, and win free gear

[p.s. In early 2009, a new report was released which provides details on a ‘99 Chevy Express 3500 van with the 5.7L gas engine, now over a million miles and still going strong on AMSOIL.  If a spark-plugged Chevy can do that, why not YOUR Cummins?]

Post Comment:

 

I found your forum post on lubrication to be one of the most useful I have read. I downloaded the white paper you suggested and plan to study it. I am planning to purchase a GMC 2500HD for farm use in several months – to tow tractors and livestock. I have worked as a computer engineer at Sony, Hughes Aircraft and Walt Disney in the past. I would like to read anything you write about your truck or GMC experiences. Thanks for sharing this information! It is really hard to get good facts and reliable sources are so rare. So I really appreciate your efforts.

I have mostly owned Toyotas and had real good luck with them – vehicles and dealers. But the 5.7L Tundra does not have the tow capacity for larger utility tractors with trailer (4 ton and up for just tractor). I once owned the “Ford Explorer from hell” so cannot really imagine going through that run around again – ignition burned out on Mojave desert dirt road after 6 months, shift-on-the-fly did not work consistently the first 2 years until finally Ford installed a new larger spin up motor, door gaskets fell off for no reason, too much to list … and dealing with Ford was an experience not to be believed. After much research the GMC 2500HD with Duramax and Allison trans seems the best choice. But I would love to hear any more thoughts you have on yours.

Ed from Taos, NM
4/3/2009

 

Got a question on your Cummins?

Please .

We make no guarantees that we’re going to publish any e-mail questions / answers, but we reserve the right to do so.  If we choose to publish e-mail content, we will withhold identities and personal information unless we have individual permissions to reveal the authors.  While the content above is often nearly identical to the actual e-mail exchange content, we reserve the right to make minor changes in content or structure to add clarity or appropriate details that would be helpful for online readers.  Added comments are typically [bracketed].

Recommendations and Related Articles:

If you want to buy AMSOIL Products, visit our vehicle maintenance page, or the AMSOIL On-Line Store or download a clickable pdf e-catalog

My AMSOIL Garage tracks your oil changes and maintenance for ALL your vehicles for FREE

Copyright 2009, 2015, 2016 DMT Technical and UltimateSyntheticOil.com

All Rights Reserved


AMSOIL has been in business since 1972 and was the first company in the world to develop an API (American Petroleum Institute) rated synthetic lubricant for automotive applications. They coined the phrase “extended drain intervals” 40 years ago with 25,000 mile drain intervals, and ever since then they have been defining the leading edge of lubrication technology, innovation and performance.  No other company in the world offers 25,000 and 35,000 mile oil changes, and AMSOIL guarantees their product performance. No-one else does that. AMSOIL is the Gold Standard in lubrication and filtration, and amazingly, their superior-performance products are cheaper to use.  The fact is, if you’re not using AMSOIL lubricants and filters, you’re wasting money.

 

We are here to help you and are at your service to assist you in your advanced technology lubrication and filtration needs.  We hope you will allow us to show you a proven better way.  We have many satisfied customers using AMSOIL products in their commercial, trucking, and fleet vehicles, as well as personal, family and recreational vehicles. And now, you know the AMSOIL secret, too.  Welcome to the AMSOIL family.

Special page for Christian business and ministry fleet vehicles and equipment.


AMSOIL is the undisputed leader in synthetics………….banner2

Since 1972, AMSOIL Synthetic drivetrain LUBRICANTS have proven to be the highest performance engine oils, greases, transmission fluids, and hydraulic and differential gear oils on the market.
But the other key issue is nanofiber filtration
.
We cover oil filters, air filters and other fluid filters like NO-ONE else can.  AMSOIL offers the highest performance, most cost-effective, most comprehensive filter line on earth.  Consider air and oil…

OIL FILTERS:

Until now, Nanofiber filtration technology has been used exclusively in medical, aerospace, electronics manufacturing, and heavy duty applications, including the US ARMY Abrams M1 tank.   AMSOIL Ea Filters are the first and only filter line to bring this technology to the auto/light truck market.

EaO nanofiber oil filters provide unmatched full-flow filtering efficiency to 98.7 percent at 15 microns, and 50 percent at 7 microns.  This translates to a 70% reduction in engine wear rates, tripling remaining engine life while giving longer filter life and lower pressure drop for better cold-start performance: the only filtration that gives you the best performance in every category!  Compare that to the filters lining the auto-parts shelves, which don’t tell you their common 7,500 mile/6-month design life and either won’t tell you what micron level their efficiency rating is for, or they claim a micron particle size without stating an efficiency: deceptive, meaningless numbers.

Additionally, consider bypass filtration systems for commercial and fleet applications in cars and light, medium and heavy trucks which can filter particles down to less than one micron and are 89% efficient at 1 micron, making oil changes virtually unnecessary and virtually eliminating engine wear.  (A standard full-flow oil filter can only filter to 20 microns with any reasonable efficiency, but 5-25 microns is widely accepted as the wear-particle size range.)  Easy to install, these oil filter systems have been proven by millions of miles of over-the road trucks, construction equipment and fleet service. And we use these on our personal diesel pickup trucks: my Duramax 2500HD has over 70,000 miles since the last oil drain, the oil analysis looks perfect, and the appearance of this diesel oil looks like a gas engine with 3,000 miles on the oil.

AIR FILTERS:

The MOST IMPORTANT filter on the M1A1 Abrams battle tank is its’ nanofiber air filter.On Patrol Abrams M1A1 Battle Tank beats the dust with Nanofiber Filtration Technology
The MOST Important filter on YOUR vehicle is also the air filter.

It’s far better, and easier, to keep wear particles out of the engine than it is to attempt filtering them out of the engine oil.  Yet filter companies and vehicle manufacturer’s are strangely silent about actual air filter performance and engine needs.  Now AMSOIL offers world-leading breakthrough Ea air filters with exclusive nanofiber technology.  Based on battlefield-proven air-induction systems used in military ground and air vehicles, this high-technology filtration is now available for consumer use!  Ea filters are guaranteed for 4 years, 100,000 miles.  The engineering rule of thumb for damaging wear particle size is 5 to 25 microns.  Incredibly, these filters are 100% efficient at removing particles of 3 microns, and are 80% effective at removing particles of a 1 micron size.  This means that NO WEAR PARTICLES CAN GET PAST OUR Ea AIR FILTERS!  AND, they’re less expensive to use than ANY other air filter.

For Power Sports applications, AMSOIL offers a line of oiled-foam filters.  These filters provide better performance than oiled-gauze air filters, and are used almost exclusively in most off-road applications including baja, dirt-track racing, and motocross.

For light to heavy trucks, both gas and diesel engines, AMSOIL’s partnership with Donaldson provides you with the best performance and most cost-effective air filtration systems in the world.  These include both Powercore and Nanofiber technology filters.  We have the full line of  Donaldson Filters Now Available , including nanofiber air, fuel, water, oil and hydraulic filters, with exclusive performance warranties (no one else in the industry offers filtration performance warranties).  Contact us for specific recommendations, or see our Diesel Page.

Air Induction Systems:AMSOIL EaAU universal conical filters replace filters on custom induction systems made by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and Banks

Well-engineered aftermarket air induction systems can provide airflow improvements with gains in horsepower, fuel economy, and towing torque.  Unfortunately in many cases they may also let far more wear particles into your engine than the OEM filter.  And oiled media can contaminate mass flow air sensors, causing problems with emissions, fuel economy and performance that can even damage transmissions in some cases.  AMSOIL lets you leave those problems behind. The full line of nanofiber universal air induction filters (EaAU) are designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and more. Whether your air induction system is in a gasoline street-rod, or a diesel truck, you have great airflow but you need better filtration and more capacity than you get with oiled gauze or foam.  AMSOIL Ea Air Induction Filters are dry no-oil filters with nanofiber filtration media to bring your aftermarket air-intake far better efficiency, 50 times the capacity, and excellent airflow while being easily cleanable – every 25,000 miles.

WHY SWITCH TO AMSOIL LUBRICATION AND FILTRATION TECHNOLOGIES?

  • AMSOIL products saves you time and money.  With recommended extended drain intervals, AMSOIL performance typically costs LESS per year than conventional oil changes.
  • The only 25,000 mile/one-year motor oils in the world.
  • The only 25,000 mile/one-year engine oil filters in the world.
  • A vehicle lubrication solution with far less environmental impact, using an estimated 87% less oil and 5-10% less fuel !
  • The only oils and filters with a warranty for GUARANTEED performance!
  • Exceeds the most stringent performance specifications of all major U.S. and foreign automotive and truck manufacturers.
  • Provides up to four-times the wear protection of other motor oils.
  • Increases the mileage life of your vehicle.
  • Improves fuel economy.
  • Increases at-wheel horsepower.
  • Lowers transmission and differential operating temperatures and delivers better shifting, even in heavy towing.
  • Lowers fleet maintenance costs by lowering the costs of both scheduled maintenance, and mechanical repairs.
  • Lowers fleet capital costs by dramatically extending vehicle service-life.  (Fleet vehicle mileage typically extended 20 to 100%.)
  • Diesel oil and filtration products designed to deliver more than 1,000,000 miles for over-the-road trucks before engine overhaul.
  • Used by many national racing teams, fleets, police departments, fire departments, ambulance fleets, construction firms and trucking companies.

 

WHY WORK WITH DMT TECHNICAL?

DMT Technical operates Ultimate-Synthetic-Oil.com as part of a group of highly skilled team of OEM Engineers and Lubrication and Filtration Specialists.  In fact, we are the ONLY such group on the internet, as well as the largest AND fastest-growing AMSOIL Dealer organization in the nation.  You too, can join our group when you become an AMSOIL Dealer and take advantage of all that we offer as you use products in your own vehicles or begin your own AMSOIL business. You cannot find a more knowledgeable and skilled group of Dealers anywhere.

In addition, as a Dealer in our group you will receive exclusive unlimited product, technical and business support from the only group of Truck and Automotive Engineers and Lubrication Specialists on the net.  That’s priceless – yet free – vital support that can make a huge difference to a growing business.

We do not run our business purely on the internet. We also have numerous commercial, industrial, trucking, excavating, construction, logging, police, racing and many more accounts that we support and service on a regular basis. We have several fully stocked warehouses and fully equipped shop facilities. This provides us with excellent knowledge of the products, equipment and the business and the ability to respond immediately to any of your needs. We will use this knowledge and experience to help you get started so you too can achieve your goals.

We possess the skills, desire and knowledge to answer questions, solve problems, improve efficiency, reduce downtime, maintenance costs and increase the durability and life of all of your vehicles.

Read what our thrilled customers have to say about us. Read through our website. Contact us with any questions. If you decide to become an AMSOIL Dealer you will be joining, in our opinion, the most skilled AMSOIL group there is. We will help you get started and provide you with the tools and information in order to be successful in this business or with technical and product assistance to use AMSOIL products in your own vehicles.

To get additional information:

We offer several options to receive information on AMSOIL. We welcome the opportunity to work with you personally as your servicing AMSOIL Dealer.  Our AMSOIL Dealer Group is led by former OEM Truck/Automotive Engineers and Lubrication Specialists with over 20 years experience each, who can provide you with unparalleled and valuable advice. This exceptional benefit is unavailable elsewhere.

Please, email us at and we will send you exclusive comprehensive info on products, technical and business factors. If you are serious about AMSOIL products and the business opportunity this is the best option. You will receive extensive technical and business support from both myself and my other OEM Detroit, Michigan Truck/Automotive Engineers and Lubrication Specialists with over 20 years experience each. We look forward to helping you learn about AMSOIL.

Or for a smaller, general information package (which includes a catalog and Dealer application) you can request information via any of the links below.  Please note that your information is always held in confidence per our Privacy Policy, and will never be sold, loaned or otherwise distributed.

To request a FREE Factory Direct Catalog by MAIL

To Immediately Download a FREE Factory Direct Catalog

Review Dealer Opportunity Information NOW  OR  Request Information on Becoming an AMSOIL Dealer  

To Buy AMSOIL Products in the AMSOIL On-Line Store

To Sell AMSOIL in Your Store or Purchase For Use in Your Businesses Equipment

To visit the AMSOIL Corporate Website for Product and Business Opportunity Information

 

AMSOIL is Proudly Made in the U.S.A.

AMSOIL is owned by Americans.

AMSOIL is America’s Oil.

AMSOIL United States and Canada the Filtration and Lubrication Gold Standards

Brian Dobben - former Senior OEM Engineer, USA and Canada Amsoil Synthetic Oil dealer - premium oils and filters

Ultimate Synthetic Oil – AMSOIL Products

Garner, North Carolina  27529

Phone: (419) 551-4792

E-mail:

^Up to Page Index