Buy Amsoil Synthetic Lubricants Factory Direct from Amsoil Dealer - Synthetic Oil AMSOIL Dealer Brian Dobben Presenting the Gold Standards in Lubrication and Filtration: Ultimate Fuel Economy, wear protection, environmental benefits and performance.

 Authorized Dealer of Premium Quality AMSOIL Synthetic Lubrication and Filtration Products

Phone: (419) 630-0874

To BUY AMSOIL BY PHONE FROM AMSOIL Headquarters
7AM-5PM Central
Toll-Free at:
1-800-777-7094

Give Operator

Sponsor # 1220579


 

Satisfied Customers


Expert Advice For YOUR Specific Application

 

We DARE you -
the Ultimate Synthetic Oil Challenge

 

Converting to AMSOIL & Breaking in a New Engine - Please Read This Critical Information

 


Amsoil Retail Product Catalog

Download Newest Amsoil Product Catalog
(~2.5 mb pdf)

 


 

Get Your FREE Special Reports on Superior Vehicle Maintenance for Less Money

- we include important insider vehicle engineering facts that OEM's don't even tell their dealership mechanics ! 

 


LATEST NEWS


Drive it for
a Million Miles like this 1999 Chevy Express 5.7L hits 1 Million miles on Amsoil


How does YOUR oil perform against Amsoil? See full 2009 Comparative Engine Oil Testing Report  


See How You Can Lower Your Vehicle Maintenance Costs to FREE

 

"Scamsoil Skeptics Corner

Revealing the boldest skeptic's questions... and our engineers' answers

 

Research Study Released -

September 2007! 

Since your whole tow load rests on TWO gear teeth, How can you save your "Diff" from failure? 

Hauling or towing?  How long do you want YOUR Differential to last?

Read the Free

Differential Gear Lubes Research White Paper (482 kb)  

Most of the 14 Name-Brand Gear Lubes Tested FAILED Specification Tests - is yours one of them? 

 

 

Free brochure on the Ultimate filters for engine oil and air (1.3 Mb pdf)

 

New CJ-4 Oil for the new 2007 Diesels

 

Fuel Economy:  Our exclusive Ultimate Guide to Improve Your Fuel Economy

(Updated again May 2009)

 

Boost your MPG -
See controlled test fleet average an 8.2% increase in fuel economy!

 

Breakthrough:  Nanofiber Air Filters use no oil, last over 100k miles, flow like oiled gauze, AND are 100% efficient
 at 3 microns!!!

 

NEW ! 

New AMSOIL EaAU Replacement Nanofiber Air Filters for Most Popular Air Induction Kits

 

What Product Do I Use?  When Do I Need to Change My Amsoil Oil or Filter? 

Oil & Filter Application Guide (PDF)

 

NEW ! 

New AMSOIL EaBP Nanofiber BYPASS Oil Filters are 98.7% efficient at 2 microns: take out more soot than any other filter!

 

Nanofiber Full-flow Oil Filters

Last 1-Year/25,000 Mile

 

AMSOIL AFL meets VW 505.01 and all Euro specs for gas/diesel/turbocharged>

 

26 Motorcycle Oils Tested: AMSOIL makes Motorcycle History with the most Comprehensive, Authoritative Research Study ever done (1 Mb PDF)

 


 

DIESEL ENGINES & FLEETS 
 

PICKUP TRUCKS:

 

Duramax Diesel Owners

 

Ford PowerStroke Diesel Owners
 


Dodge Cummins Turbo Diesel Owners
 

 


FILTERS


The Importance of Engine Filtration

 


Military / Aerospace NanoFiber filtration for YOUR VEHICLES:

Nanofiber AIR Filters:

100% at 3 microns, last 4-Years/100k Miles

 

Nanofiber OIL Filters

Last 1-Year/25k Miles

 

Cold Air Induction - Nanofiber Replacement Filters for Popular Cold Air Intake Systems

 

Bypass Oil Filters run 2-Yrs/60,000 Miles: 

98.7% at 2 microns is better than any competitor

 

 


HELPFUL LUBE & FILTER FACTS

 

 

Get Your Oil Analyzed by a Lab (pdf)

 

GM Reveals Oil Change Intervals Average 8,500 Miles with Oil Life Monitoring System (OLS) (pdf)

 

3,000 mile oil changes?!  What a rip-off!  GET REAL with modern technology.

 

Warranty Laws You Need to Know

 

Informative Articles Must Read!

 

The Auto Industry's Best Kept Secret REVEALED!


Technical Properties of Oils & Lubricants:
 About the ASTM and API Tests, and What the Test Results Mean

The Facts About
Aftermarket Oil Additives

 

API Comparative Motor Oil Testing

 

North American Engine Oils may be Harmful to European Engines


Which 30-weight Oil to Use:  0W-30, 5W-30 or 10W-30, with Discussion of Viscosity Basics


Ford & Honda's 5W20 Issue

Ten Myths About Synthetic Lubrication


Oil Color, Lubrication Ability and Contamination Level

 


AMSOIL
INFO

 

DOWNLOAD RETAIL CATALOG (2.6 Mb pdf)


AMSOIL vs. Mobil 1

 

  Compare AMSOIL to the "top" name-brand synthetic oils



Frequently Asked Questions

 

HELP US HELP THE ENVIRONMENT -
WE CAN REDUCE USED-OIL DUMPING BY OVER 87%

 

 

Converting to AMSOIL & Breaking in a New Engine - Please Read This Critical Information

 

 

Exxon-Mobil FINALLY follows AMSOIL's 33-year-old introduction of Extended Drain Intervals - kinda sorta

 


Wholesale Dealership and Preferred Customer Opportunities

 

Home Business and Financial facts
 

 

AMSOIL Introduces Four New Two Cycle Oils

 


Expert Advice For YOUR Specific Application

 

Satisfied Customers

 

 

 


 

MOTORCYCLES

 

 

12 Standardized Tests on 26 Motorcycle Oils: the most Comprehensive, Authoritative Research Study in Motorcycle History (1 Mb PDF)

 

 AMSOIL Quality Impresses Harley Riders

Harley-Davidson Oil & The Low Quality of OEM Oils
 

Why Harley Owners Choose AMSOIL!
HD Syn3 vs AMSOIL

 

Harley-Davidson AMSOIL Application Guide

Synthetics, Slipperiness and Wet Clutches  - Simply Not an Issue
 

 

 


 

Authorized AMSOIL Dealer Website

 

Links Index

 

Other Website Links

 


If you want to buy AMSOIL Products, visit the AMSOIL On-Line Store

 

In Test Results of Industry Standard Four-Ball Wear Testing, Harley-Davidson's Own "Genuine" Oil Produces the Highest Wear Scar vs. Other Leading Motorcycle Oil's!

 

Harley-Davidson Dealers Maintain That You Must Use Their "Genuine" Oil, yet Harley Davidson Doesn't Even Make Their Own Oil.  Harley-Davidson oil is manufactured by Sunoco.

Learn The Facts About Harley-Davidson Oil in this Eye-Opening Article written by A.J. Amatuzio, President and CEO of AMSOIL INC.
 

(Click Here for OTHER IMPORTANT HARLEY INFORMATION)


"A situation my daughter, Lyn, told me about recently got me to thinking about how good it is to be able to blend our own oils and have complete control over our own product quality.

Lyn loves to ride motorcycles. She recently purchased a Harley-Davidson bike and took it to the local Harley shop to have our new AMSOIL Motorcycle Oil installed. The mechanic took issue with her not using the oil Harley-Davidson sells, saying, "I'll use AMSOIL motor oil when AMSOIL starts making motorcycles!"

How would you answer a challenge like that? I was pleased to hear Lyn's response. She said, " I'll start using Harley-Davidson motor oil when Harley starts making oil!"

Perfect! The fact is that Harley-Davidson, like so many other "brands" of oil, contract with one or more oil companies to make their lubricants. Often, the decision as to who actually makes a private labeled product is based on low bid, and like almost everything manufactured by a low bidder, short cuts are taken in order to meet the low price.

I understand that Harley-Davidson has contracted with one company for a number of years to make their oil. That's good, but it still doesn't change the fact that they make motorcycles, not oil. Now consider all the private label oils out there. Every manufacturer that makes equipment with an engine has it's own name on an oil bottle. That includes all the major auto manufacturers, the makers of motorcycles, ATV's, snowmobiles, farm equipment, you name it, they all have oils. But none of these equipment manufacturers actually make an oil. They sell oil to make more money, and then they often price these oils well above the going rate for competitive lubricants because, like Harley-Davidson, they can specify or create the impression that only their oil be used in their equipment.

Now there's nothing wrong in having a goal to make money, but let's get real here. Why would anyone want to use a product manufactured down to a low production cost rather than up to high performance quality standards? We have tested a number of these private label motor oils and two-cycle oils and we found that many are mediocre quality products. None of them even comes close to performing as well as AMSOIL lubricants, and that's a fact!

I'm not taking shots at Harley-Davidson. They make good motorcycles (although I liked my Goldwing better). And I understand their concern that normal automotive oils not meeting API C specs shouldn't be used in their bikes. But when they imply that AMSOIL Motorcycle Oil is not as good as their brand or I hear that one of their dealers recommended not using AMSOIL, I get a little hostile. Those kinds of statements are the very reason we introduced our motorcycle oils in the first place. And when we say use our 20W-50 motorcycle oil in V-Twin motorcycle engines, that definitely includes Harley-Davidson motorcycles.

Our Motorcycle Products Brochure, G-391, includes wear comparisons of AMSOIL Motorcycle Oils vs. other oils, including H-D "Genuine". Both our oils demonstrate superior wear protection over all other tested brands. Interestingly enough, the highest wear scar in this test turned out to be Harley-Davidson's own "Genuine" oil!

There is a good reason why AMSOIL Motorcycle Oils protect so well against wear. They are formulated with significantly higher levels of zinc and phosphorus, which when included in proper formulation with other high quality additives, provide superior wear protection at the high operating temperatures typical of motorcycles. In addition, synthetic oils inherently reduce sump temperatures so the engines actually run cooler.

The fact is, Harley would do well to have AMSOIL make their oils for them. Then they could be assured that their oil was indeed a superior product. As it is, there may be absolutely nothing wrong with their oil for use in average service, but I guarantee you as the oil temperature gets hotter, like it does when sitting in traffic on asphalt on a hot summer day, the Harley-Davidson with AMSOIL in the crankcase is going to be far better protected and run far cooler than the bike with H-D "Genuine" oil in it. There's just no two ways about it!

So, my daughter Lyn will be going back to this mechanic armed with the facts about AMSOIL Motorcycle Oils and a few facts about H-D oil. Nobody's going to tell her that her dad's oils are not the very best. She knows better, and she's on a mission to prove her point. Who knows? Knowing Lyn, she might sign up another AMSOIL Dealer in the process."

AMSOIL Synthetic 10W-40 and 20W-50 motorcycle oils give motorcyclists what they need: Superior wear protection for high- stress motorcycle engines and transmissions that stay clean and deposit-free.

One of the most common questions we are asked is what is the recommended transmission lube for Harley-Davidson, both big twins and sportsters?

The answer is for 883cc and 1200cc sportster motorcycles, the AMSOIL Synthetic 20W-50 Motorcycle Oil is recommended for both the engine and transmission. For other models, please refer to the online Harley-Davidson AMSOIL Application Guide.

 

AMSOIL submitted five popular motorcycle oils to spectrographic analysis and Four-Ball Wear (ASTM D4172) testing and compared the results to those of AMSOIL Synthetic 20W-50 and Synthetic 10W-40 Motorcycle Oils.

None of the popular motorcycle oils compared favorably to the AMSOIL products in wear additive content or wear protection (see Spectrographic Analysis chart and Wear Protection graph).
 

Test Results: HD Syn3 vs AMSOIL V-Twin Motorcycle Oil

 

As seen in the chart below, AMSOIL Synthetic Motorcycle Oils contain significantly higher levels of zinc and phosphorus than the competing oils, and while simply adding more zinc and phosphorus doesn’t insure good performance, AMSOIL has formulated motorcycle oils with the best additives in the optimal quantities to provide superior wear protection.

 

What about oil temperature and wear? A Four-Ball Wear Test was conducted at 302°F/150°C, a higher temperature that would typically be associated with motorcycle oil operating temperatures in extreme high performance situations. AMSOIL products protect better in higher temperatures than any of the tested motorcycle oils do, leaving a wear scar up to 37 percent smaller.

 

 

 

Some motorcycle transmissions and engines share a common oil sump, so the engine oil must also provide wear protection to the transmission gears, which, according to Motorcycle Consumer News (Aug. 1998) are subject to high gear surface pressures and gear rotation speeds. The superior performance of the AMSOIL Motorcycle Oils in the Four-Ball Wear Test applies here too.

 

Motorcyclists will find no better oils than AMSOIL Synthetic Motorcycle Oils.

 

OTHER IMPORTANT HARLEY INFORMATION:

 

New Research White Paper (2005):
26 Motorcycle Oils:
the most Comprehensive, Authoritative Research Study
in Motorcycle History

 

The Great (Harley) Oil Debate (Feb 2001, American Iron Magazine)

 

Harley-Davidsons Speaks on Oil Selection and Warranty
 


Here's what a few of our satisfied customers have to say about AMSOIL:

Dear Dave.....How's it going? Fine I hope. I just wanted to bring you up to date. I received my AMSOIL 20W-50 Motorcycle oil today via UPS. I wasted no time, and changed my H-D 20W-50 oil to your 100% synthetic. I can already tell a definite change in how my transmission shift's smoother! My engine sound's quieter, and I notice the throttle response is better, and more responsive. Although my H-D 2002 V-Rod only has 1976 mile's, and is still very new, I feel more confident for the future life of my fine machine knowing it now has adequate protection in the engine, transmission, and final drive. The wet clutch seem's to be easier to operate as well. I showed my Harley pal's your wear test's specification's, and how poor a quality H-D 20W-50 really is, and some of them are now interested in switching their motorcycles to AMSOIL as well! One of my Harley pal's is a Master Diesel Mechanic, and he quit using H-D oil year's ago. He knows there are many better quality regular petroleum oil's out there than the way over-rated H-D brand! I will happily promote your product to other enthusiast's down the line. Thank's Again......Charles Graham

 

AMSOIL is the undisputed leader in synthetics.............

Since 1972, AMSOIL Synthetic drivetrain LUBRICANTS have proven to be the highest performance engine oils, greases, transmission fluids, and hydraulic and differential gear oils on the market. 
But the other key issue is
nanofiber filtration. 
We now cover oil filters, air filters and other fluid filters like NO-ONE else can.  AMSOIL offers the highest performance, most cost-effective, most comprehensive filter line on earth.  Consider air and oil...

OIL FILTERS:

Until now, Nanofiber filtration technology has been used exclusively in heavy duty applications, including the US ARMY Abrams M1 tank. AMSOIL Ea Filters are the first and only filter line to bring this technology to the auto/light truck market.

EaO nanofiber oil filters provide unmatched full-flow filtering efficiency to 98.7 percent at 15 microns, and 50 percent at 7 microns.  This translates to a 70% reduction in engine wear rates, while giving longer filter life and lower pressure drop for better cold-start performance: the only filtration that gives you the best performance in every category!  Compare that to the filters lining the auto-parts shelves, which don't tell you their common 7,500 mile design life and either won't tell you what micron level their efficiency rating is for, or they claim a micron particle size without stating an efficiency: deceptive, meaningless numbers. 

Additionally, consider bypass filtration systems for commercial and fleet applications in cars and light, medium and heavy trucks which can filter particles down to less than one micron and are 89% efficient at 1 micron, making oil changes virtually unnecessary and virtually eliminating engine wear.  (A standard full-flow oil filter can only filter to 20 microns with any reasonable efficiency, but 5-25 microns is widely accepted as the wear-particle size range.)  Easy to install, these oil filter systems have been proven by millions of miles of over-the road trucks, construction equipment and fleet service. And we use these on our personal diesel pickup trucks: my Duramax 2500HD has over 70,000 miles since the last oil drain, the oil analysis looks perfect, and the appearance of this diesel oil looks like a gas engine with 3,000 miles on the oil.


AIR FILTERS:Abrams M1A1 Battle Tank bites the dust with Nanofiber Filtration Technology

The MOST IMPORTANT filter on the M1A1 Abrams battle tank is its' nanofiber air filter. 
The MOST Important filter on YOUR vehicle is also the air filter.

It's far better, and easier, to keep wear particles out of the engine than it is to attempt filtering them out of the engine oil.  Yet filter companies and vehicle manufacturer's are strangely silent about actual air filter performance and engine needs.  Now AMSOIL offers world-leading breakthrough Ea air filters with exclusive nanofiber technology.  Based on battlefield-proven air-induction systems used in military ground and air vehicles, this high-technology filtration is now available for consumer use!  Ea filters are guaranteed for 4 years, 100,000 miles, and have OEM certified fitment for your vehicle.  The engineering rule of thumb for damaging wear particle size is 5 to 25 microns.  Incredibly, these filters are 100% efficient at removing particles of 3 microns, and are 80% effective at removing particles of a 1 micron size.  This means that NO WEAR PARTICLES CAN GET PAST OUR Ea AIR FILTERS!  AND, they're less expensive to use than ANY other air filter.

For Power Sports applications, AMSOIL offers a line of oiled-foam filters.  These filters provide better performance than oiled-gauze air filters, and are used almost exclusively in most off-road applications including baja, dirt-track racing, and motocross.

For light to heavy trucks, both gas and diesel engines, AMSOIL's partnership with Donaldson provides you with the best performance and most cost-effective air filtration systems in the world.  These include both Powercore and Nanofiber technology filters.  We have the full line of  Donaldson Filters Now Available , including air, fuel, water, oil and hydraulic filters, with exclusive performance warranties (no one else in the industry offers filtration performance warranties).  Contact us for specific recommendations, or see our Diesel Page.

Air Induction Systems:

AMSOIL offers a growing line of the only OEM certified air induction filtration systems on the market.  Offering dramatic airflow improvements for gains in horsepower, fuel economy, and towing torque, they also keep wear particles out of your engine better than any marketed product.  Current air inductions systems include the 7.3 liter PowerStroke.  In addition, AMSOIL has released a full line of nanofiber universal air induction filters (EaAU) designed to replace stock oil wetted gauze or foam conical filters that were supplied with custom induction systems produced by K&N, Injen, S&B, Green, AIRAID, AFE, TrueFlow and more. Whether your air induction system is in a gasoline street-rod, or a diesel truck, you have great airflow but you need better filtration than oiled gauze.  AMSOIL Ea Air Induction Filters are dry no-oil filters that offer far better efficiency, 50 times the capacity, excellent airflow and are easily cleanable.

    Amsoil and InJen present GM, Dodge & Ford diesel air-intakes Here!

Got a Hummer H2 or H3?  How about a newer Ford PowerStroke?  Then you already have superb nanofiber air filtration.  But we offer the real PowerCore replacement air filter for your Hummer or PowerStroke, at a much lower cost than the dealerships!

 

WHY SWITCH TO AMSOIL LUBRICATION AND FILTRATION TECHNOLOGIES?

  • AMSOIL products saves you time and money.  With recommended extended drain intervals, AMSOIL performance typically costs LESS per year than conventional oil changes.

  • The only 25,000 mile/one-year and 35,000 mile/one-year motor oils in the world.

  • A vehicle lubrication solution with far less environmental impact, using an estimated 87% less oil and 5-10% less fuel !

  • The only oils and filters with a warranty for GUARANTEED performance!

  • Exceeds the most stringent performance specifications of all major U.S. and foreign automotive and truck manufacturers.

  • Provides up to four-times the wear protection of other motor oils.

  • Increases the mileage life of your vehicle.

  • Improves fuel economy.

  • Increases at-wheel horsepower.

  • Lowers transmission and differential operating temperatures and delivers better shifting, even in heavy towing.

  • Lowers fleet maintenance costs by lowering the costs of both scheduled maintenance, and mechanical repairs.

  • Lowers fleet capital costs by dramatically extending vehicle service-life.  (Vehicle mileage typically extended 20 to 100%.)

  • Diesel oil and filtration products designed to deliver more than 1,000,000 miles for over-the-road trucks before engine overhaul.

  • Used by many national racing teams, fleets, police departments, fire departments, ambulance fleets, construction firms and trucking companies.



WHY WORK WITH DMT TECHNICAL?

DMT Technical operates Ultimate-Synthetic-Oil.com as part of a group of highly skilled team of OEM Engineers and Lubrication and Filtration Specialists.  In fact, we are the ONLY such group on the internet, as well as the largest AND fastest-growing AMSOIL Dealer organization in the nation.  You too, can join our group when you become an AMSOIL Dealer and take advantage of all that we offer as you use products in your own vehicles or begin your own AMSOIL business. You cannot find a more knowledgeable and skilled group of Dealers anywhere. 

In addition, as a Dealer in our group you will receive exclusive unlimited product, technical and business support from the only group of Truck and Automotive Engineers and Lubrication Specialists on the net.  That's priceless - yet free - vital support that can make a huge difference to a growing business.

We do not run our business purely on the internet. We also have numerous commercial, industrial, trucking, excavating, construction, logging, police, racing and many more accounts that we support and service on a regular basis. We have several fully stocked warehouses and fully equipped shop facilities. This provides us with excellent knowledge of the products, equipment and the business and the ability to respond immediately to any of your needs. We will use this knowledge and experience to help you get started so you too can achieve your goals.

We possess the skills, desire and knowledge to answer questions, solve problems, improve efficiency, reduce downtime, maintenance costs and increase the durability and life of all of your vehicles.

Read what our satisfied customers have to say about us. Read through our website. Contact us with any questions. If you decide to become an AMSOIL Dealer you will be joining, in our opinion, the most skilled AMSOIL group there is. We will help you get started and provide you with the tools and information in order to be successful in this business or with technical and product assistance to use AMSOIL products in your own vehicles.

To get additional information:

We offer several options to receive information on AMSOIL. We welcome the opportunity to work with you personally as your servicing AMSOIL Dealer. Our AMSOIL Dealer Group is led by a Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. This exceptional benefit is unavailable elsewhere.

Please, email us at Brian@Ultimate-Synthetic-Oil.com and we will send you an exclusive comprehensive package of product, technical and business information. If you are serious about AMS OIL products and the business opportunity this is the best option. You will receive extensive technical and business support from both myself and my Direct Jobber, a Detroit, Michigan Truck/Automotive Engineer and Lubrication Specialist with over 19 years experience. We look forward to helping you learn about AMSOIL.

Or for a smaller, very general information package (which includes a catalog and Dealer application) you can request information via any of the links below.  Please note that your information is always held in confidence per our Privacy Policy, and will never be sold, loaned or otherwise distributed.

To request a FREE Factory Direct Catalog by MAIL

To Immediately Download a FREE Factory Direct Catalog

For Information on Becoming an AMSOIL Dealer

To Buy AMSOIL Products in the AMSOIL On-Line Store

To Sell AMSOIL in Your Store or Purchase For Use in Your Businesses Equipment

To visit the AMSOIL Corporate Website for Product and Business Opportunity Information

 

AMSOIL is Proudly Made in the U.S.A.

AMSOIL is owned by Americans.

AMSOIL is America's Oil.

Filtration and Lubrication Gold Standards - the Best

DMT Technical

Ultimate Synthetic Oil - AMSOIL Products

119 Norlick Drive

Bryan, Ohio  43506

Phone: (419) 630-0874

E-mail: Brian

Links